I love the Fed IV!!

FedOregon · Mar 10, 2017

Zombie_61 said:
Here are the most recent photos of my triplets:

I've had the Dark Brown (Imperial felt) since August of 2008, and the Tawny Fawn (Imperial felt) since October of 2013. Both hats have seen decent amounts of rain with no ill effects; if anything, the rain made the felt a little softer. I've had the Moonstone Gray (Heritage felt) since September of 2015, but it has only been lightly rained on once or twice.

Great bash on your triplets!

Zombie_61 · Mar 10, 2017

FedOregon said:
Great bash on your triplets!

Thank you Sir! Initially I had given the Dark Brown one a simple Center Dent crease, but quickly discovered that didn't leave enough room for my head, which would push the dent out from the inside. As such, I didn't wear it often, but couldn't decide how I wanted to re-crease it. A few months ago I finally decided to try a Diamond (something I had never had much luck with) and I liked it so much that I re-creased the other two (which had Teardrop creases) as well.

There are obviously some variations, but I went with what each hat seemed to want. And now all three fit my head better than they ever did before!

Windsock8e · Apr 24, 2017

Here's my first Akubra which is a Fed IV. The wide brim is winning me over, but still working on getting it right.

Sent from my iPad using Tapatalk

moontheloon · Apr 24, 2017

Windsock8e said:
Here's my first Akubra which is a Fed IV. The wide brim is winning me over, but still working on getting it right.

Sent from my iPad using Tapatalk

looks great ...

RJR · Apr 24, 2017

moontheloon said:
looks great ...

+1

FedOregon · Apr 24, 2017

moontheloon said:
looks great ...

+2

Knotten · Apr 24, 2017

What sort of bash is that? A center dent, diamond or something else? I like the looks of what I'm seeing.

Zombie_61 · Apr 25, 2017

Sharp! I think those proportions (crown height/shape and brim width) suit you very well Windsock8e.

Windsock8e · Apr 25, 2017

Thanks all, reassuring feedback. Front on, I was having trouble / getting used to the lack of taper (which is what I wanted, but still seemed massive at first) - seemed quite wide in the crown, never mind the brim.

As I was warned by other Loungers, I am finding 2-2 1/4 inch brims on my other, modern hats appearing somewhat small now?!

Knotten said:
What sort of bash is that? A center dent, diamond or something else? I like the looks of what I'm seeing.

Thanks! It's a teardrop following the Teardrop Workshop. Having said that, it is not smooth and I keep wanting to put a diamond in. Now that the crown height seems right and the brim shaped how I think I like it, will probably move to a diamond.

Lean'n'mean · Apr 25, 2017

Windsock8e said:
Here's my first Akubra which is a Fed IV. The wide brim is winning me over, but still working on getting it right.

That's one of the most stylish fed IV's I've seen & Corto Maltese agrees with me.

Windsock8e · Apr 25, 2017

Lean'n'mean said:
That's one of the most stylish fed IV's I've seen & Corto Maltese agrees with me.

Wasn't sure how well known Corto Maltese is around these parts. We get great service from the local UPS man as he is a fan as well.

Rogera · Apr 25, 2017

Windsock8e said:
Here's my first Akubra which is a Fed IV. The wide brim is winning me over, but still working on getting it right.

Sent from my iPad using Tapatalk

Great job on that Fed!

Benzadmiral · Apr 25, 2017

Windsock8e said:
Here's my first Akubra which is a Fed IV. The wide brim is winning me over, but still working on getting it right.

Sent from my iPad using Tapatalk

Good work. Is that the Carbon Gray? The first pic looks like it, but the second has tones of brown.

My first fedora back in '09 was the CG Fed IV. After viewing videos here, I had no trouble shaping it. Looks like you used the same resource!

Windsock8e · Apr 25, 2017

Benzadmiral said:
Good work. Is that the Carbon Gray? The first pic looks like it, but the second has tones of brown.

My first fedora back in '09 was the CG Fed IV. After viewing videos here, I had no trouble shaping it. Looks like you used the same resource!

Yes, it's carbon grey but under a yellow light which seems to change the tone. For sure, I would not have been able to crease it without the how to' s and pictures in the Lounge! Am waiting for an OR Clone and depending on how that works, may order a Moonstone or BG Camp Draft. Argh. Addiction. Must slow it down to savour the moment and manner of each hat...!

Rogera · Apr 25, 2017

Windsock8e said:
Yes, it's carbon grey but under a yellow light which seems to change the tone. For sure, I would not have been able to crease it without the how to' s and pictures in the Lounge! Am waiting for an OR Clone and depending on how that works, may order a Moonstone or BG Camp Draft. Argh. Addiction. Must slow it down to savour the moment and manner of each hat...!

Nah, you can do that when you have an entire wall covered in hats

Bob Roberts · Apr 25, 2017

Lean'n'mean said:
That's one of the most stylish fed IV's I've seen & Corto Maltese agrees with me.

What is "Corto Maltese" ???

Windsock8e · Apr 26, 2017

Bob Roberts said:
What is "Corto Maltese" ???

Adult themed (as in topics, not pornographic) adventure comic book set between 1913-1925 or so about a Venetian sailor explorer etc. Famous for the drawings by the author, Hugo Pratt and for the great stories and characters. You can see more here https://en.m.wikipedia.org/wiki/Corto_Maltese or at cortomaltese.com (there is an English language icon).

Pre-internet, video days, these stories were pretty cool (uh, still are).

Mark53 · Apr 26, 2017

I bought a Fed IV about four years ago. It was my second Akubra, the first being a Bushman that I got about 28 years ago. I saw it on the Lounge and was very excited. I ordered one in Moonstone but it doesn't work for me. In pictures posted by you gentlemen it looks great with its' blocky crown and wide brim. On this jug head the crown looks very low however. I even had JJ Hat Center put on a 7/8" ribbon to try to make the crown look taller. Didn't work It is now my least worn hat. Has anyone else had this experience? If so what did you do other than to cease wearing it?

Bob Roberts · Apr 27, 2017

Mark53 said:
I bought a Fed IV about four years ago. It was my second Akubra, the first being a Bushman that I got about 28 years ago. I saw it on the Lounge and was very excited. I ordered one in Moonstone but it doesn't work for me. In pictures posted by you gentlemen it looks great with its' blocky crown and wide brim. On this jug head the crown looks very low however. I even had JJ Hat Center put on a 7/8" ribbon to try to make the crown look taller. Didn't work It is now my least worn hat. Has anyone else had this experience? If so what did you do other than to cease wearing it?

I don't kno. Simple center crease and a little rake.

Fed in a Fedora · Apr 27, 2017

Mark53 said:
I bought a Fed IV about four years ago. It was my second Akubra, the first being a Bushman that I got about 28 years ago. I saw it on the Lounge and was very excited. I ordered one in Moonstone but it doesn't work for me. In pictures posted by you gentlemen it looks great with its' blocky crown and wide brim. On this jug head the crown looks very low however. I even had JJ Hat Center put on a 7/8" ribbon to try to make the crown look taller. Didn't work It is now my least worn hat. Has anyone else had this experience? If so what did you do other than to cease wearing it?

Go post that hat on the classified ads. Size and color?

I love the Fed IV!!

I'll Lock Up

A-List Customer

I'll Lock Up

I'll Lock Up

Practically Family

A-List Customer

I'll Lock Up

A-List Customer

My Mail is Forwarded Here

Call Me a Cab

A-List Customer

My Mail is Forwarded Here

I'll Lock Up

A-List Customer

New in Town

I'll Lock Up

Attachments

Practically Family

Similar threads

Log in

Forum statistics