Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Golden Era Things You've Revived Or Repaired For Use

greatestescaper

One of the Regulars
Messages
293
Location
Fort Davis, Tx
I'll have to upload some photos, but I've been restoring old carpentry tools in an attempt to get a shop of my own up and running. Growing up any shop work was done with my grandfather, however, now that I am in West Texas and my grandfather is still in New York I am finding a need of a shop of my own. I also am ever in search of cast iron and various pieces of enamelware to restore and bring back to use. The current list includes a small pot (usually for melting butter over a fire), a ladle, a few coffee boilers, and some greatly seasoned skillets.
 

Shangas

I'll Lock Up
Messages
6,116
Location
Melbourne, Australia
From This...

0a37cac289d5dfffbaef2fe77352b0d2.jpg


...to this...:

123b82cdf94e8d87fbb5444dfde909f8.jpg


This antique brass tiffin carrier is about 100 years old. I bought it back in August, and I finally finished cleaning it!! I left it looking a bit aged, but at least presentable.

The brass frame that holds it together was a bit wonky. Careful bending and pressing straightened it out. One of the bowls had a bit of a dent in it, and a couple of good hammer-strikes pressed it out again. The result is amazing! I love it :)

6346f0e262f621972d1e059d5925048d.jpg
 
Last edited:

Shangas

I'll Lock Up
Messages
6,116
Location
Melbourne, Australia
Not exactly 'revived or repaired', but I bought these recently...

440bb87ad4f7b8107f097a0bdc8851de.jpg


...then I polished them...

2af8221f3d9161b045618350bc7b61f2.jpg


They're solid, sterling silver vintage travelling chopsticks. Since they're travelling chopsticks, they required some sort of case or pouch to carry them in. No such pouch came with them when I bought them, so I made this, out of scrap leather:

563b7eb84fcb0c6d3ee10d30ccaa0857.jpg


...all rolled-up...

7ef736953d714eff7ffcf53ae368d756.jpg


...open and empty...

7d172910e73c2b6ae6b8f192fd11ae67.jpg


...packed up, and ready to go!! :D
 

Shangas

I'll Lock Up
Messages
6,116
Location
Melbourne, Australia
My current 'Golden Era' restoration project:

fae9008506d949d1dbe6f1a79dedd358.jpg


This is a Victorian-era brass and mahogany pill-rolling machine. Basically how it works is that you would grind up the ingredients of your pills in a pestle and mortar...

4f3dbefc8ac8558ce4eeb40e5d6a3696.jpg


You'd thicken up the powder with an appropriate syrup or sap, and form it into a paste. This was then rolled out into a thin sausage and laid across the base of the pill-roller. The paddle was slid and rolled across the top, pressing the paste through the grooves and rolling out little spherical pills, which would land in a removable, slide-out tray which you'd then use to tip the pills into a jar or container for storage.

So far, I've straightened out some of the bent brass bits, tightened some loose screws, oiled the roller-bearings on the roller, and polished up the brass...

99f4329cc59990c447da1b7466c1660a.jpg


The next step is to rebuild the missing pill-drawer (which fits into the slot to the left of the pill-cutting grooves that you see in the photo above). I've already measured the area, purchased the wood and got a very good idea of what it's mean to look like.

Now all I have to do is build it! :)
 

BlueTrain

Call Me a Cab
Messages
2,073
I've thought of search for a pair of pince-nez glasses to be part of a costume that would be perfect for me, along with an eyeshade, sleeve protectors, sleeve garters and shirt with a detachable collar. I make my living as a shiny pants bookkeeper.
 

scotrace

Head Bartender
Staff member
Messages
14,373
Location
Small Town Ohio, USA
This turned up in a shop in 2013 for $50. A WWI era Arts & Crafts Morris Chair, made by Royal Easy Chair. You push the button on the arm and lean back, and it reclines into several detent positions. There's also a folding footrest underneath, along with a wire cage for stashing magazines.
It's been sitting, stripped to the frame, in my dining room ever since. This month I finally found myself in a position to reupholster it and it should be finished today. I didn't refinish it, but cleaned it carefully, sealed it with shellac, and added satin alkyd varnish and buffed it out with rottenstone powder. It looks clean and well cared for but still well used. It has all new 8-way hand tied springs now.
The original cover is "genuine imitation Spanish leather," according to factory literature from the time, which looked to be some kind of sprayed canvas. Mice had eaten most of the stuffing and a good bit of the cover. This thing spent a very long time in a basement or attic.

I'll post a picture of it finished over the weekend. I've wanted a Morris chair for ages, and this was an affordable way to get one, even if it isn't a fancy Stickley thing.



IMG_5095.jpg
 

Joe50's

Familiar Face
Messages
79
I like restoring and putting things back into the job they were made for. I've worked on floor lamps, clocks, a fan, a Phyfe style end table and a Cosco stool. I haven't completely gone through it and recapped the chassi but I got a rca phonograph consollette working . I was informed at the thrift shop it didn't work, but the mech was just stuck from dried grease. I had to find new legs but rca had set it up with metal built in feet for the option of table use . I also have a Motorola console that worked but was stuck in reject that has been working ok in manual since I cleaned the some of the dried grease. I also like to keep things as close to original as I can, I'd rather invest time and money into something opposed to up cycling it.
 
Last edited:

Joe50's

Familiar Face
Messages
79
this video should be how my rca consollete will sound once its recapped and gone through . During my initial cleaning and test I tried the 45 "little red ridinghood"and was impressed by the sound quality it produced.
 

Benzadmiral

Call Me a Cab
Messages
2,815
Location
The Swamp
I replaced my ca. 1960s General Electric toaster with . . . another one of the exact same model. The first one was fine, except that its thermostat never worked, and last month the latch stopped being reliable, so I couldn't simply push the lever down and busy myself pouring coffee until my toast was ready. This one works flawlessly.

Encouraged by this, I've thought about a stove top coffee maker, one of the Corning Ware ones that allow you to do 6 cups. Anybody have one of these that you use every day? Is the coffee better tasting than from a modern drip machine? And will it work with the same grind of coffee -- or will I have to buy "regular grind" or something like that?
 

sheeplady

I'll Lock Up
Bartender
Messages
4,479
Location
Shenandoah Valley, Virginia, USA
I replaced my ca. 1960s General Electric toaster with . . . another one of the exact same model. The first one was fine, except that its thermostat never worked, and last month the latch stopped being reliable, so I couldn't simply push the lever down and busy myself pouring coffee until my toast was ready. This one works flawlessly.

Encouraged by this, I've thought about a stove top coffee maker, one of the Corning Ware ones that allow you to do 6 cups. Anybody have one of these that you use every day? Is the coffee better tasting than from a modern drip machine? And will it work with the same grind of coffee -- or will I have to buy "regular grind" or something like that?
We have a corning ware one that was missing one of the percolator parts, so we used it as a teapot. So while I can't answer your other questions, it does take quite a bit longer to heat up compared to a metal vessel of the same size, if that is a consideration. Conversely, it keeps the beverage hotter longer too. (My grandmother used a metal percolator, so I know those exist.)
 

Benzadmiral

Call Me a Cab
Messages
2,815
Location
The Swamp
We have a corning ware one that was missing one of the percolator parts, so we used it as a teapot. So while I can't answer your other questions, it does take quite a bit longer to heat up compared to a metal vessel of the same size, if that is a consideration. Conversely, it keeps the beverage hotter longer too. (My grandmother used a metal percolator, so I know those exist.)
Well, if I buy one, it would be for 1-2 cups of coffee on the weekends, not the 4-cup batch I brew before I go to exercise and finish with breakfast. You can get the parts on eBay as well as the entire unit.
 

LizzieMaine

Bartender
Messages
32,958
Location
Where The Tourists Meet The Sea
Just spent a couple of hours refurbishing and repairing an RCA 90-A "program stand," which was RCAspeak for a heavy-duty floor stand for broadcast microphones. The RCA mics of the Era were very heavy -- the standard 44-BX weighs eight pounds, and requires a solid, substantial stand for reliable, safe use. I have a 44-BX, and have never been happy with the modern "heavy duty" stand I'd been using with it, so when I got the chance to get a 90-A at a reasonable price, I grabbed it.

The thing weighs almost 35 pounds, and is heavy, machined steel plated in satin chrome. As with all RCA gear of the 1930s, attention was also given to making it pleasant to look at: designer John Vassos gave it an understated deco feel that would have harmonized well with the studios of the day. But the really interesting thing about it is the adjustment mechanism. If you use mic stands today you know you have to twist a collar at the joint to adjust the height. Older stands usually had some variation of this, or even a simple thumbscrew. But the 90-A has no visible adjustment mechanism at all - you simply pull up the smaller section of tubing, and it stays in place by itself. I've always been intrigued by this, and the fact that it didn't work properly on mine gave me the excuse to take the thing apart and see what was going on inside.

I was expecting to find some sort of elaborate inner clutch -- but all I found was a couple of felt washers, a spring about eight inches long, and a brass flange attached to a strange woven-copper cylinder that reminded me of nothing more or less than a Chinese Finger Trap. And that, I realized after puzzling for a bit, is exactly what it is. The principle is that the woven copper tightly surrounds the inner tube of the stand and is held in place by the flange, which is clamped between the larger tube and a sleek Vassos-styled metal fitting at the end of that tube. When you pull on the inner tube to adjust the height of the mic, the woven cylinder relaxes and allows you to move it up or down. When you release the pressure, the spring pulls the cylinder tight around the inner tube and holds it firmly in place, even under the weight of an eight pound microphone. A pipe fitting with a leather "tire" on the inner end of the inner tube keeps the whole thing centered.

It's one of the simplest, yet most ingenious things I've ever come across, and the only reason it didn't work is because some yutz thought it needed lubrication and slathered about a quart of 20-weight motor oil down the joint. After cleaning that out and flexing the copper cylinder a few times, it now works perfectly -- you can adjust the height of the mic anywhere from 44 inches to 74 inches, which means anyone from Tiny Ruffner to Johnny the Philip Morris bellhop could have used it comfortably.

After finishing up I looked up the patent for the adjustment mechanism, originally developed for floor lamps. That's one of the most intriguing things about working with old stuff -- the ingenuity that went into solving problems with very simple devices.
 
Messages
16,813
Location
New York City
Just spent a couple of hours refurbishing and repairing an RCA 90-A "program stand," which was RCAspeak for a heavy-duty floor stand for broadcast microphones. The RCA mics of the Era were very heavy -- the standard 44-BX weighs eight pounds, and requires a solid, substantial stand for reliable, safe use. I have a 44-BX, and have never been happy with the modern "heavy duty" stand I'd been using with it, so when I got the chance to get a 90-A at a reasonable price, I grabbed it.

The thing weighs almost 35 pounds, and is heavy, machined steel plated in satin chrome. As with all RCA gear of the 1930s, attention was also given to making it pleasant to look at: designer John Vassos gave it an understated deco feel that would have harmonized well with the studios of the day. But the really interesting thing about it is the adjustment mechanism. If you use mic stands today you know you have to twist a collar at the joint to adjust the height. Older stands usually had some variation of this, or even a simple thumbscrew. But the 90-A has no visible adjustment mechanism at all - you simply pull up the smaller section of tubing, and it stays in place by itself. I've always been intrigued by this, and the fact that it didn't work properly on mine gave me the excuse to take the thing apart and see what was going on inside.

I was expecting to find some sort of elaborate inner clutch -- but all I found was a couple of felt washers, a spring about eight inches long, and a brass flange attached to a strange woven-copper cylinder that reminded me of nothing more or less than a Chinese Finger Trap. And that, I realized after puzzling for a bit, is exactly what it is. The principle is that the woven copper tightly surrounds the inner tube of the stand and is held in place by the flange, which is clamped between the larger tube and a sleek Vassos-styled metal fitting at the end of that tube. When you pull on the inner tube to adjust the height of the mic, the woven cylinder relaxes and allows you to move it up or down. When you release the pressure, the spring pulls the cylinder tight around the inner tube and holds it firmly in place, even under the weight of an eight pound microphone. A pipe fitting with a leather "tire" on the inner end of the inner tube keeps the whole thing centered.

It's one of the simplest, yet most ingenious things I've ever come across, and the only reason it didn't work is because some yutz thought it needed lubrication and slathered about a quart of 20-weight motor oil down the joint. After cleaning that out and flexing the copper cylinder a few times, it now works perfectly -- you can adjust the height of the mic anywhere from 44 inches to 74 inches, which means anyone from Tiny Ruffner to Johnny the Philip Morris bellhop could have used it comfortably.

After finishing up I looked up the patent for the adjustment mechanism, originally developed for floor lamps. That's one of the most intriguing things about working with old stuff -- the ingenuity that went into solving problems with very simple devices.


Any chance of a pic of both the overall stand and the "adjustment mechanism -" as I'm intrigued?
 

scottyrocks

I'll Lock Up
Messages
9,160
Location
Isle of Langerhan, NY
Is the coffee better tasting than from a modern drip machine? And will it work with the same grind of coffee -- or will I have to buy "regular grind" or something like that?

Not to derail this thread, but just a thought for the coffee lovers - have you tried 'pour-over?' It's completely manual. It's a flanged cone with a hole at the bottom that sits on the cup, the filter, coffee, and hot water (which can be boiled any old-fashioned way one's heart desire).

Everyone in this house says that our coffees are much better tasting than any machine method.

Anyway, back to our regularly scheduled programming.
 

busmatt

New in Town
Messages
48
I’ve just done a quick refurbishment of this Ronson lighter

00f20e47a1a9db858ae5d9ad58dd8dae.jpg


b707c21a377e82f00a86a8ed6f25205c.jpg


f50a11c994d57ae3793663265c5c6134.jpg


It wasn’t working so I stripped it, scrubbed the flint striking wheels that was full of old flint, lightly polished the other parts with a microfiber cloth, fitted a new flint, filled her up and hey presto.

Now if only I smoked[emoji23] but it’s nice to carry just in case a young lady needs a light [emoji6]

Matt


Brought to you by HYPNOTOAD
 

Forum statistics

Threads
107,021
Messages
3,026,577
Members
52,528
Latest member
Zonko
Top