Reproduction classic workwear

The Good · Jun 20, 2010

Probably not of a "vintage" design, but this is what I had ordered the other day, as I'm in need of a denim workshirt:

At eleven dollars (about 60% off), plus shipping, this was too cheap for me to pass. Would you say it has a classic appearance for a denim shirt?

mattfink · Jun 21, 2010

Creeping Past said:
I tried on a couple of the Gap chinstrap shirts today while in Paris. Very poor indeed. Armholes way too big, leading to restricted arm movement and pulling around the chest, and they're far too short.

The chinstraps are fine, but the shirts they're attached too are abominable.

Armholes sort of like this:

Mysterious Mose · Jun 21, 2010

So they made ill-fitting shirts in the old days, too.
Nice belly pockets.
I like workshirts one-pocket, pullover.

mattfink · Jun 21, 2010

Mysterious Mose said:
So they made ill-fitting shirts in the old days, too.
Nice belly pockets.
I like workshirts one-pocket, pullover.

The probably sold these shirts for $1 or so...

J. M. Stovall · Jun 21, 2010

mattfink said:
The probably sold these shirts for $1 or so...

That would be $16 of today's dollars, just like on clearance at the GAP.

Creeping Past · Jun 22, 2010

mattfink said:
Armholes sort of like this

Yes, ill-fitting, just like that.

mattfink · Jun 22, 2010

Creeping Past said:
This is more like it.

I particularly like the roomy armholes on a shirt with generous proportions and long tails, making for a properly wearable garment. If only all the new ones were made like this...

Like I said before, if you order the "Tall" from the Gap they are plenty long in the body. The normal shirts are far too short to tuck in if you are at all tall (I'm 6' 4"). They gussets hang out of the side of your trousers!

BellyTank · Jun 22, 2010

Sleeve problems...

Aha- sometimes, it's not ONLY the depth of the armhole/sleeve connection...
sometimes the angle of attachment is problematic- many modern shirts(suit coats, too)have a downward-pointing sleeve/attachment, rather than a sleeve at the horizontal.

But a "batwing" type sleeve attachment causes a big pull, when raising the arms. Armpits of shirts and jackets should be close as possible to that of the wearer for optimal comfort- too tight is obviously too tight. To low or too far outboard- problem.

Old sweaters and work shirts are often cut "smock style"- where the arms are mounted horizontally (rather than at a down-angle)and the actual garment body is cut with the "stumps" of arms and the actual sleeves are sewn onto these. makes for better arm movement.

I see we have a new, related thread- good news.

B
T

flat-top · Jul 1, 2010

Saw this shirt from Polo today. Very nice.

flat-top · Jul 6, 2010

Mister Freedom Tees at The Gap

More here:
http://www.gap.com/browse/category.do?cid=11900

McFarlaneNYC · Jul 10, 2010

Did anyone see that Levi in the US started selling 201's? yes they are not perfect replica's but they are a good answer to vintage enthusiasts who cant put up the dough for the perfect ones. They cover all the major basis which are hard to come by on the cheap: selvage edge, indigo, and buckle on the back.
Charlie

Dinerman · Jul 10, 2010

Here they are

32 is the longest inseam they do in those? What if you're moderately tall? What if you want to cuff 'em, as shown in the picture? What if you want to take into account the bit of shrinkage that seems to happen with most jeans?

McFarlaneNYC · Jul 10, 2010

Dinerman said:
Here they are

32 is the longest inseam they do in those? What if you're moderately tall? What if you want to cuff 'em, as shown in the picture? What if you want to take into account the bit of shrinkage that seems to happen with most jeans?

If I had to guess they will probably get longer inseams when they are out a bit longer. Or maybe they have longer ones in the store. I really don't know.

Charlie

Creeping Past · Jul 10, 2010

I'm guessing they've a relatively short inseam length because most of their customers will want to wear them low-slung.

Lefty · Jul 10, 2010

I don't know if these fit into an existing thread, so I'll just post them in my favorite thread (or half of it, anyway).

Kinney Colorado boots, $3 at a local garage sale - I'm guessing 80s or 90s (Kinney was gone in '98).
edit: They were making them in 1979, but who knows for how long.
I don't understand how to lace them - specifically, the first, low and wide speed-lacer. I just continued criss-crossing the laces all the way up, but the pull from those back-set speed-lacers causes the tongue area of the boots to push upward (kind of bubbling the boot). Any ideas?

flat-top · Jul 11, 2010

Dinerman said:
Here they are

32 is the longest inseam they do in those? What if you're moderately tall? What if you want to cuff 'em, as shown in the picture? What if you want to take into account the bit of shrinkage that seems to happen with most jeans?

I was at the store today and only saw these in black, which doesn't seem to be online. Pretty cool. I'm pretty sure they only went up to a 32 inseam as well.

marineabilly · Jul 11, 2010

Great - thanks for nothing guys. Now I have to go out and buy the 201's :eusa_clap Flat-Top, how do the black jeans look? I might have to call my local Levis store to find out what they have in stock.

____________
Vintage Engineer Boot Blog

flat-top · Jul 11, 2010

marineabilly said:
Great - thanks for nothing guys. Now I have to go out and buy the 201's :eusa_clap Flat-Top, how do the black jeans look? I might have to call my local Levis store to find out what they have in stock.

____________
Vintage Engineer Boot Blog

They look good. They're more of a canvas I would think. A true flat black.

mattfink · Jul 12, 2010

flat-top said:
I was at the store today and only saw these in black, which doesn't seem to be online. Pretty cool. I'm pretty sure they only went up to a 32 inseam as well.

Horse shit....why only up to a 32"? Short people rejoice, the rest of us cry! Those brown workwear style are killer.

mattfink · Jul 12, 2010

On second thought, they look a little low rise in the pics...might have to try them on at the store...hoping they sell longer inseams off line.

Reproduction classic workwear

Call Me a Cab

Practically Family

Practically Family

Practically Family

Call Me a Cab

One Too Many

Practically Family

I'll Lock Up

My Mail is Forwarded Here

My Mail is Forwarded Here

Familiar Face

Super Moderator

Familiar Face

One Too Many

I'll Lock Up

My Mail is Forwarded Here

A-List Customer

My Mail is Forwarded Here

Practically Family

Practically Family

Similar threads

Log in

Forum statistics