Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Akubra Overload

The Good

Call Me a Cab
Messages
2,361
Location
California, USA
Another hat I'm thinking about is the Silver Spur. I like how it doesn't have the holes on the side so common to Akubra hats. It kind of reminds me of some of the hats John Wayne wore too.


AKU071.jpg



I'm thinking that the Snowy River or Overlander hats are too low crowned, and the brim is too dipped down in the front and back. Am I right in thinking that the Silver Spur starts with a relatively flat brim (or one that is curled at to begin with)? Also, is that color really accurate to the sandtone fawn tone, or does it appear differently outdoors? Anybody want to show a sandtone fawn hat here?
 
Last edited:

Brian Niebuhr

One of the Regulars
Messages
150
Location
Iowa
Three month waiting on a Boss of the plains and a Silver Spur from EA. Should be here around Christmas or soon after. What more could you ask for than an Akubra for Christmas? How about two!
 

The Good

Call Me a Cab
Messages
2,361
Location
California, USA
Three month waiting on a Boss of the plains and a Silver Spur from EA. Should be here around Christmas or soon after. What more could you ask for than an Akubra for Christmas? How about two!

Nice, that's what I'm going for too. You're getting the silver spur, is it the sandtone or black one? I've seen a couple pictures on the internet of black ones, but not the sandtone tan hat.

My concern is that Everything Australian has the hat at 4.75 inches, and this website below has it at 5 1/2.

http://www.aussiebushhats.com.au/catalog/product_info.php?products_id=67


It's meant to be open crown from the latter, but is EA's crown height based on the crease?
 
Last edited:

Brian Niebuhr

One of the Regulars
Messages
150
Location
Iowa
The Snowy River's crown is pretty low. The only thing I don't like about it actully. I ordered the Silver Spur for the reason you gave: higher crown and no holes. Note that it comes with an open crown. I emailed EA about that because the measurements they gave seemed too low for an open crown and seemed to fit the crease shown. They said that the measurements given are a creased crown. Not sure why they would do that when they ship it open.
 

Brian Niebuhr

One of the Regulars
Messages
150
Location
Iowa
I ordered sandtone fawn. I think that the pic you posted is this color. So hard to tell how it will actually look. I was just going to wait and see.
 

The Good

Call Me a Cab
Messages
2,361
Location
California, USA
The Snowy River's crown is pretty low. The only thing I don't like about it actully. I ordered the Silver Spur for the reason you gave: higher crown and no holes. Note that it comes with an open crown. I emailed EA about that because the measurements they gave seemed too low for an open crown and seemed to fit the crease shown. They said that the measurements given are a creased crown. Not sure why they would do that when they ship it open.

OK, thanks. I think I'm ruling out the Snowy River style. Now it's between the Silver Spur sandtone fawn hat, or Federation IV in tawny fawn. I think I'm wanting a western style this time, as the Fed IV is essentially the same as my brown one, only a different color. I thought about the Stylemaster too, but maybe I'll wait before I get another dress hat.
 

Brian Niebuhr

One of the Regulars
Messages
150
Location
Iowa
Well now I just dont know what to think. My Snowy River has a 5 1/2" open crown. The Silver Spur sure looks like a much taller crown to me even when creased. I was thinking it had a 6 1/2" crown. No facts to back that up though, just from the looks of it. I wish these dealers would care a little more about what they were selling.
 

casechopper

My Mail is Forwarded Here
Messages
3,783
Location
Northern NJ
The silver spur has a much higher crown than a snowy river. I've had both in the past and the silver spur was one of the highest crowned Akubra hats I've had. I would place it at slightly taller than both the Fed IV and the Campdraft but as I no longer have it here I can't measure it exactly.
 

m0nk

One Too Many
Messages
1,004
Location
Camp Hill, Pa
I was considering a snowy river as well, but this silver spur, and the price on the site above, may be the solution. My only dislike is that it appears to be a really wide brim, at 89mm (approx 3.5"). Is this correct?
 

casechopper

My Mail is Forwarded Here
Messages
3,783
Location
Northern NJ
That is the brim size. The one I had was made of very thin light felt that was a bit stiff on the brim (though nothing like modern hatco hats) and very flexible in the crown.
 

jlee562

I'll Lock Up
Messages
5,052
Location
San Francisco, CA
I was considering a snowy river as well, but this silver spur, and the price on the site above, may be the solution. My only dislike is that it appears to be a really wide brim, at 89mm (approx 3.5"). Is this correct?

But on the other hand, it's a raw edge brim, so it's only a trim away from whatever you want.
 

Brian Niebuhr

One of the Regulars
Messages
150
Location
Iowa
I kinda wish EA put windstring eyeletts near the hatband as DM does. Makes it easy to place a simple DIY windstring for those windy days. Looks better to me without them but they are handy and I use mine fairly often. I have even cut holes in a few "beater" hats for that reason. Hate fly away hats! Only happened once but it will never happen again!
 

Brian Niebuhr

One of the Regulars
Messages
150
Location
Iowa
Ok, this is bothering me. The SR, Overlander, Cattleman and Territory share the same crown shape but are they the same overall size? My Cattleman's crown is bigger. Doesnt have the taper as my SR and measures slightly higher.
 

Duper

Practically Family
Messages
899
Location
Ontario, Canada
I kinda wish EA put windstring eyeletts near the hatband as DM does. Makes it easy to place a simple DIY windstring for those windy days. Looks better to me without them but they are handy and I use mine fairly often. I have even cut holes in a few "beater" hats for that reason. Hate fly away hats! Only happened once but it will never happen again!

On the EA site I see they will add a free kangaroo leather chin strap to any Akubra ordered. It is very obvious, but on some hats like a Cattleman it may be fine.
 

Duper

Practically Family
Messages
899
Location
Ontario, Canada
Ok, this story takes Akubra Overload to a whole new dimension. They held a muster (rally) today in Kempsey, the home of Akubra with the goal of entering the Guiness Book of Records. They were aiming for 1000 folks wearing their Akubras. They had tried before and fell short, but today they more than succeeded. Over 1900 Akubra fans showed up and were counted.

http://www.abc.net.au/news/2012-11-09/kempsey-sets-akubra-wearing-record/4363018?&section=news

They started arriving around 06:30 AM their local time to assemble for the official count.

I particularly like #27 - #29 of the slide show for showing the volume of hats in the corral.

http://www.macleayargus.com.au/story/880492/we-smashed-it-kempseys-akubra-muster-is-a-world-record/?cs=1274
 
Last edited:

Forum statistics

Threads
107,230
Messages
3,031,543
Members
52,699
Latest member
Bergsma112
Top