Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Shinki A-2 from RMC

Solo

Familiar Face
Messages
75
Location
Hollywood
Body wise it is a great fit. Your discomfort after zipping up probably comes from the small armhole. Even a trimmed Aero or Eastman with say the same chest measurement as your RM will likely still has wider arm and armhole.

I think you’re absolutely right. It is the high armhole that’s brings the shoulder closer when i zip up. It’s the same feeling i had when i first got my Board Racer, although it now has relaxed quite a bit. This A2 is actually a lot more comfy than how the BR was.
 

Solo

Familiar Face
Messages
75
Location
Hollywood
I was just in the RMC store in Tokyo, and I believe the "waxy" finish is what makes Shinki so appealing to me. Great density, color and substance, but that finish - so pleasant to the touch.
Walking into the RMC will be like a starving kid wandering into a candy store for me. :) My Shinki has lost much of its shine. I think it’s the acrylic coating they put on, but they have become more muted and distressed, especially on the sleeves. Shinki creases very differently than Vicenza or Horween. Really like that unique character.
 

Solo

Familiar Face
Messages
75
Location
Hollywood
I agree that the fit is really tricky in the A2. I think that the A2 is pretty boxy and when you have a 10" drop from chest to waist it's hard to have a flattering cut.

BTW, I love the look of your leather. The matte, dark seal is great!

Contrary to what I used to believe, I now think A2s were really for slender folks with 6-7” drops. The shoulder/torso ratio is what really determines the overall look of the jacket. I am glad I am a bit height challenged, but I haven’t seen many A2s that look good on taller folks as the jacket is cut quite short. I also found the RMC A2s at least 1” shoulder on the sleeves which is perfect. Most RW and Dubow cuts I’ve tried, the sleeves were just too long. I see why most die-hard A2 fans go custom with Aero or GW.

And yes, this Shinki is on the more matte side with little shine. It also has lost quite a bit of that acrylic shine which i like. The reason why I went with the RMC was that it was the only manufacturer that offered the darker seal. Tried a several russet and didn’t quite work for me.
 

kojax

Practically Family
Messages
937
Location
haverhill
this is my hilts a2 toys mccoy jacket size 38 few pictures taken for my comp cam
 

Attachments

  • Photo on 11-17-19 at 2.56 PM.jpg
    Photo on 11-17-19 at 2.56 PM.jpg
    182.6 KB · Views: 1,269
  • Photo on 11-17-19 at 2.56 PM #2.jpg
    Photo on 11-17-19 at 2.56 PM #2.jpg
    179.2 KB · Views: 1,280
  • Photo on 11-17-19 at 2.57 PM.jpg
    Photo on 11-17-19 at 2.57 PM.jpg
    190.3 KB · Views: 1,258

dudewuttheheck

I'll Lock Up
Messages
4,260
Your instagram and blog have some amazing photos. See that you had the same jacket. Love the FWs you have, but i must say the A2 you had looked fantastic.
Thanks! Unfortunately, I weightlifted myself out of my A2 and had to sell it, but I may grab another one down the road.
 

kojax

Practically Family
Messages
937
Location
haverhill
my a2 hilts toy mccoy jacket chest size pit to pit 19 inches shoulder 17 inches sleeve 29 center back 23
 

Attachments

  • Photo on 11-17-19 at 4.48 PM.jpg
    Photo on 11-17-19 at 4.48 PM.jpg
    194.8 KB · Views: 1,228

Solo

Familiar Face
Messages
75
Location
Hollywood
my a2 hilts toy mccoy jacket chest size pit to pit 19 inches shoulder 17 inches sleeve 29 center back 23
Very similar to mine at 17" shoulder, 20" pit, 24" sleeve and back. These measurements typically equate to 36+ on the typical rough wear cut.
 

Solo

Familiar Face
Messages
75
Location
Hollywood
Solo, what would be your typical jacket measurements?
I wear loose 36 or trim 38. My chest measures at 37”. My typical jacket is 17” shoulder, 19” pit, 18” waist, 27-28” length, 23.5” sleeve. So my A2 is literally my suit jacket size except for the back length at 24”.
 

breezer

Practically Family
Messages
799
Location
Scotland
my aero bronco is the same - just slightly too tight around the chest when zipped - but I think the trim fit works.
 

jonesy86

I'll Lock Up
Messages
4,610
Location
Kauai
I wanted to add my RMC A2 into this thread. Size 42. I am 5'7 ~170-175lbs

I agree that the armholes are tight, however I would not want anything bigger, and I love this leather.
Oh yeah! I think RMC gets the best Shinki!
 

Forum statistics

Threads
107,021
Messages
3,026,576
Members
52,528
Latest member
Zonko
Top