Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Making a Western hat by hand?

Cornshucker77

Call Me a Cab
Messages
2,691
Location
Northeast Nebraska, USA
That's great, Scott (you've probably heard that all your life)!
Really nice, man.
Where did you buy the Nutria hatbody?
Don't tell me you're a trapper too .... please.

That's great, Scott (you've probably heard that all your life)!
Really nice, man.
Where did you buy the Nutria hatbody?
Don't tell me you're a trapper too .... please.
Thanks HR Here is the link to the hat bodies.
I use to hunt but I never did trap. Some relatives of mine did. I guess I was too lazy to get up every morning and check traps. :)
https://www.sunrisehatsupply.com/collections/coypu-hat-bodies
 

Yahoody

One Too Many
Messages
1,107
Location
Great Basin
Made this hat as I started the thread back on 2/15/18. It cleans up nice with just a brush and still has the original liner in it. Sweat is still in great shape as well. Kinda fun to see just how much abuse a good beaver blank can take. I figure this hat has seen almost 2 solid years of daily use now. Summer (June to Sept) gets a straw. Looks to be good for another decade or so before it will need a rebuild.

IMG_5575 (2).JPG



IMG_5580 (2).JPG
 
Last edited:

Gobi

One of the Regulars
Messages
169
I like this thread. I dream about figuring out how to make the most durable hat possible.
Yahoody has shown that you can improve the felt of a Winchester body. That's awesome. How "good" can you make it? What were the tricks they used way back when? What corners are cut these days that leave us with poorly felted felt? My mind is ALWAYS in that neck of the woods. I think myself to sleep most nights about just that. Dreaming about coming up with a felt body making process where I could actually make my own body blanks and felt them as good as the hats of long ago. Wouldn't that be nice?
I've bought two custom pure beaver hats from two different makers in my lifetime and neither one could hold up to the elements. I was disappointed in both. Akubra makes outstanding hats out of rabbit, why cant anyone make an even better hat from beaver? I realize it's just a dream but dang is it a fun dream to have. If I ever strike it rich, I'll dedicate my money and time to making that happen!
 
Messages
18,915
Location
Central California
I like this thread. I dream about figuring out how to make the most durable hat possible.
Yahoody has shown that you can improve the felt of a Winchester body. That's awesome. How "good" can you make it? What were the tricks they used way back when? What corners are cut these days that leave us with poorly felted felt? My mind is ALWAYS in that neck of the woods. I think myself to sleep most nights about just that. Dreaming about coming up with a felt body making process where I could actually make my own body blanks and felt them as good as the hats of long ago. Wouldn't that be nice?
I've bought two custom pure beaver hats from two different makers in my lifetime and neither one could hold up to the elements. I was disappointed in both. Akubra makes outstanding hats out of rabbit, why cant anyone make an even better hat from beaver? I realize it's just a dream but dang is it a fun dream to have. If I ever strike it rich, I'll dedicate my money and time to making that happen!


You can’t really change the attributes of the felt much once it’s felted. You can’t make a modern Winchester hat body into the equivalent of vintage felt no matter what you do to it. That said, my Winchester beaver felt hats have handled rain very well. They take care after they get wet, but they look great with just a little work. The western weights are even more durable.

I haven’t been blown away by FEPSA felt, but I’m curious to see how the 50/50 beaver and rabbit turns out. By far the best modern felt that I’ve handled is the dress weight Stetson Excellent 100% beaver. It compares very favorably with some of the better vintage felt I’ve handled.

More than dress felt, I’ve been disappointed with western hat bodies. The Sunrise 100% nutria is nice, and certainly seems durable, but it doesn’t compare to vintage.
 
Last edited:

suitedcboy

One Too Many
Messages
1,346
Location
Fort Worth Texas or thereabouts
"I've bought two custom pure beaver hats from two different makers in my lifetime and neither one could hold up to the elements. I was disappointed in both. "

I'm curious how they failed. I wear felt hats almost daily, even in summer, in Texas. I learned decades ago that a hat that would go a couple of years or more and still look good (to me) started at a 20X Resistol or Bailey. I then figured out 100x (100% beaver in Bailey and something less/different in Stetson and Resistol) held up better and then custom 100% beaver did a wee bit better. All got sweat and oil stains that soaked in around the front 1/3 from forehead but the better hats didn't droop from rain and kept shape better. Customs had the best sweatbands. I will say I like my daily wear westerns to be stiff, damned stiff, and the ones that lost stiffness aggravate me since they flop on windy days and when riding fast. I have shallacked several that failed in this way to get them stiff to my liking. I have cleaned and made half-assed attempts at changing them up but mostly settled with stiffening and then shaping them. The stetsons I got years ago always had to be worked on a LOT due to the older (before mid 90's??) westerns always being regular ovals and my head is egg oval. I have only bought one since that time as a result of wanting fit and not wanting to compromise desired shape..
 
Messages
18,915
Location
Central California
"I've bought two custom pure beaver hats from two different makers in my lifetime and neither one could hold up to the elements. I was disappointed in both. "

I'm curious how they failed. I wear felt hats almost daily, even in summer, in Texas. I learned decades ago that a hat that would go a couple of years or more and still look good (to me) started at a 20X Resistol or Bailey. I then figured out 100x (100% beaver in Bailey and something less/different in Stetson and Resistol) held up better and then custom 100% beaver did a wee bit better. All got sweat and oil stains that soaked in around the front 1/3 from forehead but the better hats didn't droop from rain and kept shape better. Customs had the best sweatbands. I will say I like my daily wear westerns to be stiff, damned stiff, and the ones that lost stiffness aggravate me since they flop on windy days and when riding fast. I have shallacked several that failed in this way to get them stiff to my liking. I have cleaned and made half-assed attempts at changing them up but mostly settled with stiffening and then shaping them. The stetsons I got years ago always had to be worked on a LOT due to the older (before mid 90's??) westerns always being regular ovals and my head is egg oval. I have only bought one since that time as a result of wanting fit and not wanting to compromise desired shape..


I don’t prefer the stiff westerns. Just a difference of opinion. Many of us watch how the best western felt from 70+ years ago would bend and move. A breeze would cause the entire brim to flip up 90 degrees and then return to shape when the wind stopped. It’s relatively easy to impregnate most any felt with enough shellac or other stiffener to make a hat rock hard. It’s much harder to make the “molds like clay” felt. I don’t mind a stiff western for some applications, but it’s certainly not a favorite. I envy you for liking what is actually readily available.
 

Yahoody

One Too Many
Messages
1,107
Location
Great Basin
Interesting. I have owned decent felts bought new going back to the 50s, Resistol and Stetson. 7x to 20x. Some of the best felt I have owned is a couple of Bailey 7x hats from the early '90s. That would include my first 100% beaver hat from '93. Still have and wear most of them. But I'd put up the current Winchester beaver bodies again any vintage hat for quality. Much of how a hat feels and is worked depends on the guy's skills and patience that working on the felt body.

When I am too busy or just too lazy to build myself a new hat I have a couple of custom hatters I go to. There are store bought hats I could get cheaper, then reblock and reshape to my liking. Tempted to do so about once a week generally. But then I remember just how bad the junk felt that any $500 or less store bought hat uses. (Akubra being the exception as posted prior and Amish fur felt) and I cringe. Just no interest in bad felt.

I've seen some mighty pitiful 100% beaver come from Winchester in two instances in the last 10 years. Looking back..as I still have both...likely dress weight bodies passed off as western bodies by either Winchester or the hat maker. Way too soft for my use either way.

Not being able to "change" a felt blank? Ya, I have to disagree with that to some extent. Dress weight felt isn't western grade felt for sure. But an unfired western felt isn't going to be much better than dress felt till it is fired properly. If you know what you are doing, firing a 100% beaver blank makes all the difference in the world in what you get for a durable hat, be it in the rain or how stiff the brim is and will stay over time. Firing the felt interlocks the fur fibers tighter in the felt than how they come from the felter. A lot tighter. It is how you get a durable and stiff hat with no shellac. I don't use shellac on any of my own hats. But have used cans of it on a couple of sub par 100% beaver hat blanks from Winchester that other hatters have built on.

I'd consider any western felt hat, of any brim size, that bent in the wind on a loping horse a POS hat. Simply would not wear it.

IMG_2645.JPG


Still pretty dusty here and will be for another month or two. But tomorrow I'll do a before and after photo when I brush off and clean up that black hat some. Should be able to give you an idea just how stiff a good hat body can be compared to one that aint.

That hat has been soaked through with rain more times than I can remember. I don't rebuild or re-block it, just let it dry in our front room typically in the mid 70s and the low humidity of our climate.
 

Yahoody

One Too Many
Messages
1,107
Location
Great Basin
"Many of us watch how the best western felt from 70+ years ago would bend and move. A breeze would cause the entire brim to flip up 90 degrees and then return to shape when the wind stopped."

To any western hat owner I have known known going back now a 100 years, that would be a sub par hat and unusable.
 
Last edited:
Messages
18,915
Location
Central California
"Many of us watch how the best western felt from 70+ years ago would bend and move. A breeze would cause the entire brim to flip up 90 degrees and then return to shape when the wind stopped."

To any western hat owner I have known known going back now a 100 years, that would be a sub par hat and unusable.


Well, the hats of all the movie cowboys from the pre-War period were much softer than the felt we see today. The hats used by cavalrymen were much softer than the hats we have today. The hats worked out for those users.

I didn’t mean that the proper preparation and techniques aren’t needed to get the best out of the Winchester’s felts, I’m just saying that no matter what you do to a current Winchester beaver you will never get the felt to say a 7X Clear Beaver quality. You just can’t get there from here. I wish we could. I’m also not saying that stiff westerns aren’t useful hats, but that’s not the kind of felt that many of us lust after.
 
Messages
18,915
Location
Central California
Interesting. I have owned decent felts bought new going back to the 50s, Resistol and Stetson. 7x to 20x. Some of the best felt I have owned is a couple of Bailey 7x hats from the early '90s. That would include my first 100% beaver hat from '93. Still have and wear most of them. But I'd put up the current Winchester beaver bodies again any vintage hat for quality. Much of how a hat feels and is worked depends on the guy's skills and patience that working on the felt body.

When I am too busy or just too lazy to build myself a new hat I have a couple of custom hatters I go to. There are store bought hats I could get cheaper, then reblock and reshape to my liking. Tempted to do so about once a week generally. But then I remember just how bad the junk felt that any $500 or less store bought hat uses. (Akubra being the exception as posted prior and Amish fur felt) and I cringe. Just no interest in bad felt.

I've seen some mighty pitiful 100% beaver come from Winchester in two instances in the last 10 years. Looking back..as I still have both...likely dress weight bodies passed off as western bodies by either Winchester or the hat maker. Way too soft for my use either way.

Not being able to "change" a felt blank? Ya, I have to disagree with that to some extent. Dress weight felt isn't western grade felt for sure. But an unfired western felt isn't going to be much better than dress felt till it is fired properly. If you know what you are doing, firing a 100% beaver blank makes all the difference in the world in what you get for a durable hat, be it in the rain or how stiff the brim is and will stay over time. Firing the felt interlocks the fur fibers tighter in the felt than how they come from the felter. A lot tighter. It is how you get a durable and stiff hat with no shellac. I don't use shellac on any of my own hats. But have used cans of it on a couple of sub par 100% beaver hat blanks from Winchester that other hatters have built on.

I'd consider any western felt hat, of any brim size, that bent in the wind on a loping horse a POS hat. Simply would not wear it.

IMG_2645.JPG


Still pretty dusty here and will be for another month or two. But tomorrow I'll do a before and after photo when I brush off and clean up that black hat some. Should be able to give you an idea just how stiff a good hat body can be compared to one that aint.

That hat has been soaked through with rain more times than I can remember. I don't rebuild or re-block it, just let it dry in our front room typically in the mid 70s and the low humidity of our climate.

You don’t have to add shellac to modern Winchester felt because they have a shellac core from the factory. There’s nothing wrong with these stiff westerns, and no doubt there are applications where they could be superior to vintage felt, but there are a lot of us that pine for the felt of yesteryear because no matter what any hatter does with current Winchester it can’t duplicate what we’re after. I only have a couple westerns from the 1920s and/or 1930s, and for my uses it’s so far better than any current felt that comparisons don’t make any sense. These were working western hats of their time, and the felt is just a completely different animal from modern Winchester beaver and all of them are much softer than modern stiff westerns.
 
Last edited:

Yahoody

One Too Many
Messages
1,107
Location
Great Basin
"the hats of all the movie cowboys from the pre-War period were much softer than the felt we see today. The hats used by cavalrymen were much softer than the hats we have today. The hats worked out for those users."

We'll have to agree to disagree. If I wanted a softer hat like you describe I'd get a dress felt to start with. Been there done that. The original turn of the century and earlier cavalry hats were trash. Typical government issue clothing for the day...trash. "Worked out" is relative I suspect to your expectations.

Also why many of Custer's crew used straw hats on the summer campaigns. Straw held up better than the issue felts even if it did bend in the wind on a horse. During the Civil War?

"In early June 1863 Custer, assigned to a cavalry unit, showed particular bravery when confronting a Confederate force near Aldie, Virginia. Wearing a wide-brimmed straw hat, Custer led a cavalry charge that put him, at one point, in the midst of the Confederate force. Legend has it that the enemy, seeing Custer's distinctive hat, took him for one of their own, and in the confusion he was able to spur his horse and escape."

Custer
civil-war-in-color-lincoln-20.jpg


civil war era hats
civil-war-in-color-lincoln-32.jpg


early 1880s likely by the new #3 pictured
586a4252b30e0329b23833f9360cb150.jpg


1901 Montana. By 1900 a "good" felt cowboy hat used bound edges and pencil rolls on the big brimmed hats to stiffen the brims just to avoid a bent brim. Small brims on a good felt hat by the '20s didn't need either. Pretty obvious what a new hat looked like compared to an older and well used one in this photo.

Cowboys%2BFrom%2Bthe%2BLate%2B19th%2Bto%2BEarly%2B20th%2BCenturies%2B%25289%2529.jpg


early '50s in South Dakota
october-1950-cowboy-ranchers-at-a-rodeo-in-belvidere-south-dakota-picture-id3166378
 
Messages
18,915
Location
Central California
"the hats of all the movie cowboys from the pre-War period were much softer than the felt we see today. The hats used by cavalrymen were much softer than the hats we have today. The hats worked out for those users."

We'll have to agree to disagree. If I wanted a softer hat like you describe I'd get a dress felt to start with. Been there done that. The original turn of the century and earlier cavalry hats were trash. Typical government issue clothing for the day...trash. "Worked out" is relative I suspect to your expectations.

Also why many of Custer's crew used straw hats on the summer campaigns. Straw held up better than the issue felts even if it did bend in the wind on a horse. During the Civil War?

"In early June 1863 Custer, assigned to a cavalry unit, showed particular bravery when confronting a Confederate force near Aldie, Virginia. Wearing a wide-brimmed straw hat, Custer led a cavalry charge that put him, at one point, in the midst of the Confederate force. Legend has it that the enemy, seeing Custer's distinctive hat, took him for one of their own, and in the confusion he was able to spur his horse and escape."

Custer
civil-war-in-color-lincoln-20.jpg


civil war era hats
civil-war-in-color-lincoln-32.jpg


early 1880s likely by the new #3 pictured
586a4252b30e0329b23833f9360cb150.jpg


1901 Montana. By 1900 a "good" felt cowboy hat used bound edges and pencil rolls on the big brimmed hats to stiffen the brims just to avoid a bent brim. Small brims on a good felt hat by the '20s didn't need either. Pretty obvious what a new hat looked like compared to an older and well used one in this photo.

Cowboys%2BFrom%2Bthe%2BLate%2B19th%2Bto%2BEarly%2B20th%2BCenturies%2B%25289%2529.jpg


early '50s in South Dakota
october-1950-cowboy-ranchers-at-a-rodeo-in-belvidere-south-dakota-picture-id3166378


You really can’t tell the qualities I’m talking about from still photos. I can say that the hats that working men wore as sold through Miller Stockman, Sears, Stetson, and other catalogs in the early part of the 20th century are not the same type felt as what Winchester currently makes. These are western weight felts and definitely not dress felt, but they are not comparable with what I’ve seen from any Winchester western hat.

I don’t hate Winchester, but it’s not in the same league as vintage felt. For my purposes, which are certainly different from yours, the modern felt is a huge disappointment and nothing I know of can be done to make current felt the equivalent of Vintage felt...if only it were so.
 
Messages
10,343
Location
vancouver, canada
Interesting. I have owned decent felts bought new going back to the 50s, Resistol and Stetson. 7x to 20x. Some of the best felt I have owned is a couple of Bailey 7x hats from the early '90s. That would include my first 100% beaver hat from '93. Still have and wear most of them. But I'd put up the current Winchester beaver bodies again any vintage hat for quality. Much of how a hat feels and is worked depends on the guy's skills and patience that working on the felt body.

When I am too busy or just too lazy to build myself a new hat I have a couple of custom hatters I go to. There are store bought hats I could get cheaper, then reblock and reshape to my liking. Tempted to do so about once a week generally. But then I remember just how bad the junk felt that any $500 or less store bought hat uses. (Akubra being the exception as posted prior and Amish fur felt) and I cringe. Just no interest in bad felt.

I've seen some mighty pitiful 100% beaver come from Winchester in two instances in the last 10 years. Looking back..as I still have both...likely dress weight bodies passed off as western bodies by either Winchester or the hat maker. Way too soft for my use either way.

Not being able to "change" a felt blank? Ya, I have to disagree with that to some extent. Dress weight felt isn't western grade felt for sure. But an unfired western felt isn't going to be much better than dress felt till it is fired properly. If you know what you are doing, firing a 100% beaver blank makes all the difference in the world in what you get for a durable hat, be it in the rain or how stiff the brim is and will stay over time. Firing the felt interlocks the fur fibers tighter in the felt than how they come from the felter. A lot tighter. It is how you get a durable and stiff hat with no shellac. I don't use shellac on any of my own hats. But have used cans of it on a couple of sub par 100% beaver hat blanks from Winchester that other hatters have built on.

I'd consider any western felt hat, of any brim size, that bent in the wind on a loping horse a POS hat. Simply would not wear it.

IMG_2645.JPG


Still pretty dusty here and will be for another month or two. But tomorrow I'll do a before and after photo when I brush off and clean up that black hat some. Should be able to give you an idea just how stiff a good hat body can be compared to one that aint.

That hat has been soaked through with rain more times than I can remember. I don't rebuild or re-block it, just let it dry in our front room typically in the mid 70s and the low humidity of our climate.
I bought a pure white 10X beaver Bailey western on Ebay a while back. I dyed it grey in very hot water, just off the boil. The felt was good quality, dense and stiff. During the dying process the hat refelted or conintued to felt. The body came out much much smaller and waaaay more dense. I call it my bullet proof hat as I am convinced it is kevlar like and could shed a bullet. Do you think this dyeing process and the re-felting made the hat more impervious to rain and in any way improved the quality of the felt? It came out in the end with the same level of stiffness.
 
Messages
10,343
Location
vancouver, canada
Here is my latest version.....a western ish fat.....a country gentlemen's hat. It is Tonak rabbit with a nice soft hand. The pencil curl gives the brim enough support so no shellac needed. I really like working with the Tonak dress weight felts. Easy to work with and they finish up nicely.
CIMG1980.JPG
 

Gobi

One of the Regulars
Messages
169
"I've bought two custom pure beaver hats from two different makers in my lifetime and neither one could hold up to the elements. I was disappointed in both. "

I'm curious how they failed. I wear felt hats almost daily, even in summer, in Texas. I learned decades ago that a hat that would go a couple of years or more and still look good (to me) started at a 20X Resistol or Bailey. I then figured out 100x (100% beaver in Bailey and something less/different in Stetson and Resistol) held up better and then custom 100% beaver did a wee bit better. All got sweat and oil stains that soaked in around the front 1/3 from forehead but the better hats didn't droop from rain and kept shape better. Customs had the best sweatbands. I will say I like my daily wear westerns to be stiff, damned stiff, and the ones that lost stiffness aggravate me since they flop on windy days and when riding fast. I have shallacked several that failed in this way to get them stiff to my liking. I have cleaned and made half-assed attempts at changing them up but mostly settled with stiffening and then shaping them. The stetsons I got years ago always had to be worked on a LOT due to the older (before mid 90's??) westerns always being regular ovals and my head is egg oval. I have only bought one since that time as a result of wanting fit and not wanting to compromise desired shape..

The customs I had both shrank and tapered easily from rain. The felt was fluffy feeling and not dense like you would expect. The sweatband on one of them was unwearable from the start. Maybe it was too absorbent, it stuck like glue to my forehead, I'd have to peel it off and it would leave a sore red marks. The other one had a nice sweatband but the felt body of that one was really fluffy and "airy". It shrank and tapered in no time and was unwearable. Shortly after that happened, I learned about Akubra hats (learned about them here). I was impressed at how well they handle rain, especially being rabbit felt. Now why the heck cant someone use whatever techniques Akubra uses but use beaver or a mix and come up with a really good hat. That would be a dream come true.
 

Gobi

One of the Regulars
Messages
169
I myself dont care for an overly stiff hat. I dont want it floppy either. The hats I lust after move and bend but snap right back into place. The felt behaves sorta like if it were made out of silicone. The hats from old western movies appear to do just that. Some of my older Stetson and resistols are almost there, pretty close but not quite.
 

Forum statistics

Threads
107,031
Messages
3,026,767
Members
52,533
Latest member
RacerJ
Top