Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
Messages
17,901
Location
Nederland
This came in the last day of 2020.
Stra Barbisio Extra Lusso in Quercia (oak). Yes, I know it's green, but like so often: if you see gills this close you're already lost.
Size 56 with the raw edge brim at 6cm and the crown at 10cm. Weighs 115 grams. Love the shape of this one (the flange especially) and the felt is fabulous; thin and tight with a nice soft hand.

barbisio quercia_01.jpg
barbisio quercia_02.jpg
barbisio quercia_03.jpg
barbisio quercia_04.jpg
barbisio quercia_05.jpg
barbisio quercia_06.jpg
barbisio quercia_07.jpg
barbisio quercia_08.jpg
barbisio quercia_10.jpg
barbisio quercia_11.jpg
 
Messages
17,901
Location
Nederland
It brought its big brother with it as well.

Barbisio Rat Gondin (nutria). Size 61 with the brim at 7cm and the crown at 12cm at the center dent. I can't tell you the colour because the stitches of the sweatband are fragile and the band itself feels quite stiff even if it looks in perfect shape.
At one point in its life the hat was hit by a small ember (I think) because a tiny hole can be seen on the top of the crown in the third pick. Must have burned right through the felt, because it even left a small mark on the liner. You'd have to know it was there though; it's hardly noticeable handling the hat.
Not a common hat in this size and type of felt. Weighs 148 grams.

barbisio gondin61_01.jpg
barbisio gondin61_02.jpg
barbisio gondin61_03.jpg
barbisio gondin61_04.jpg
barbisio gondin61_06.jpg
barbisio gondin61_08.jpg
barbisio gondin61_09.jpg
barbisio gondin61_10.jpg
barbisio gondin61_11.jpg
barbisio gondin61_12.jpg
 
Messages
10,943
It brought its big brother with it as well.

Barbisio Rat Gondin (nutria). Size 61 with the brim at 7cm and the crown at 12cm at the center dent. I can't tell you the colour because the stitches of the sweatband are fragile and the band itself feels quite stiff even if it looks in perfect shape.
At one point in its life the hat was hit by a small ember (I think) because a tiny hole can be seen on the top of the crown in the third pick. Must have burned right through the felt, because it even left a small mark on the liner. You'd have to know it was there though; it's hardly noticeable handling the hat.
Not a common hat in this size and type of felt. Weighs 148 grams.

View attachment 296915 View attachment 296916 View attachment 296917 View attachment 296918 View attachment 296919 View attachment 296920 View attachment 296921 View attachment 296922 View attachment 296923 View attachment 296924
A couple of beauties
 

Rmccamey

I'll Lock Up
Messages
5,665
Location
Central Texas
Another beauty!

It brought its big brother with it as well.

Barbisio Rat Gondin (nutria). Size 61 with the brim at 7cm and the crown at 12cm at the center dent. I can't tell you the colour because the stitches of the sweatband are fragile and the band itself feels quite stiff even if it looks in perfect shape.
At one point in its life the hat was hit by a small ember (I think) because a tiny hole can be seen on the top of the crown in the third pick. Must have burned right through the felt, because it even left a small mark on the liner. You'd have to know it was there though; it's hardly noticeable handling the hat.
Not a common hat in this size and type of felt. Weighs 148 grams.

View attachment 296915 View attachment 296916 View attachment 296917 View attachment 296918 View attachment 296919 View attachment 296920 View attachment 296921 View attachment 296922 View attachment 296923 View attachment 296924
 

Just A Hat Rack

Practically Family
Messages
619
Location
Buckeye Nation
The first hats of the New Year.
Our Hornskovs turned up on New Year's morning. Finally, we got to say Merry Christmas to each other!
View attachment 296815
My "Broker" in camel with a moss ribbon. This has a bigger more imposing crown than I expected, but that's OK. I think I'll enjoy wearing it.
View attachment 296816 View attachment 296817 View attachment 296819
My wife's "Low Author" also in camel but with a wine ribbon.
View attachment 296818 View attachment 296820
Both are fine looking hats. Congrats on ringing in the new year with these.
 
Messages
10,943
New Year... New Stetson....
Stephen L Stetson - Never Connected in ANY Way

E2E0EE88-FAAD-46EF-ACC5-D9F48B7D241F.jpeg


Stephen L Stetson - Olympic Quality - Graphic
4 1/2 crown as shaped (about 5 1/4 open)
1 inch black grosgrain ribbon
2 1/4 brim with 1/8 grosgrain binding

Stetson.. Stephen L Stetson. I’ve had a hankering for one of these SLS hats since I believe I saw @Redfokker post about his and the Stephen L Stetson story. @Randall Renshaw alerted me to this one a few weeks back and I couldn’t pass it up. A lot for me to like about this hat. Proportions work great... the felt feels very good in hand and responds very well. It includes the Never Connected in Any Way liner disclaimer and also features the unique Carter Trademark Detachable leather sweat system. The manufacturing tag lists the model or color as Graphic.... I couldn’t get a good photo of the whole tag as it is pinned in under the Carter detachable sweat buttons. Taking a guess at 1950s on this one with plastic liner tip protector.

2E3805C4-A128-4837-9764-95E23332907E.jpeg
C6E06500-B95F-447D-94CA-02441C6B9855.jpeg
7F723DCA-138C-40EC-8E25-1ADFB36532CA.jpeg
F62E98D4-7937-405A-9FCC-775B154F1CB5.jpeg
9ABF2A49-D883-436B-A47C-54479224C2F1.jpeg
59E367CC-6F50-4FDC-B52E-B057D75CC23D.jpeg
FA9847CF-4FBB-4F1A-AC1D-6C47E999552B.jpeg
C8F7AF7B-D570-4BD3-81CB-F3B76B3587FD.jpeg
6B1047F9-B681-4DDD-968F-5653A2CFD2D7.jpeg
 

Rumad

One Too Many
Messages
1,536
New Year... New Stetson....
Stephen L Stetson - Never Connected in ANY Way

View attachment 297101

Stephen L Stetson - Olympic Quality - Graphic
4 1/2 crown as shaped (about 5 1/4 open)
1 inch black grosgrain ribbon
2 1/4 brim with 1/8 grosgrain binding

Stetson.. Stephen L Stetson. I’ve had a hankering for one of these SLS hats since I believe I saw @Redfokker post about his and the Stephen L Stetson story. @Randall Renshaw alerted me to this one a few weeks back and I couldn’t pass it up. A lot for me to like about this hat. Proportions work great... the felt feels very good in hand and responds very well. It includes the Never Connected in Any Way liner disclaimer and also features the unique Carter Trademark Detachable leather sweat system. The manufacturing tag lists the model or color as Graphic.... I couldn’t get a good photo of the whole tag as it is pinned in under the Carter detachable sweat buttons. Taking a guess at 1950s on this one with plastic liner tip protector.

View attachment 297102 View attachment 297103 View attachment 297112 View attachment 297113 View attachment 297114 View attachment 297115 View attachment 297116 View attachment 297117 View attachment 297118
That’s a good lookin hat Joe
 

ETBass

One of the Regulars
Messages
217
New Year... New Stetson....
Stephen L Stetson - Never Connected in ANY Way

View attachment 297101

Stephen L Stetson - Olympic Quality - Graphic
4 1/2 crown as shaped (about 5 1/4 open)
1 inch black grosgrain ribbon
2 1/4 brim with 1/8 grosgrain binding

Stetson.. Stephen L Stetson. I’ve had a hankering for one of these SLS hats since I believe I saw @Redfokker post about his and the Stephen L Stetson story. @Randall Renshaw alerted me to this one a few weeks back and I couldn’t pass it up. A lot for me to like about this hat. Proportions work great... the felt feels very good in hand and responds very well. It includes the Never Connected in Any Way liner disclaimer and also features the unique Carter Trademark Detachable leather sweat system. The manufacturing tag lists the model or color as Graphic.... I couldn’t get a good photo of the whole tag as it is pinned in under the Carter detachable sweat buttons. Taking a guess at 1950s on this one with plastic liner tip protector.

View attachment 297102 View attachment 297103 View attachment 297112 View attachment 297113 View attachment 297114 View attachment 297115 View attachment 297116 View attachment 297117 View attachment 297118

Nice acquisition @Blare .
 
Messages
18,936
Location
Central California
New Year... New Stetson....
Stephen L Stetson - Never Connected in ANY Way

View attachment 297101

Stephen L Stetson - Olympic Quality - Graphic
4 1/2 crown as shaped (about 5 1/4 open)
1 inch black grosgrain ribbon
2 1/4 brim with 1/8 grosgrain binding

Stetson.. Stephen L Stetson. I’ve had a hankering for one of these SLS hats since I believe I saw @Redfokker post about his and the Stephen L Stetson story. @Randall Renshaw alerted me to this one a few weeks back and I couldn’t pass it up. A lot for me to like about this hat. Proportions work great... the felt feels very good in hand and responds very well. It includes the Never Connected in Any Way liner disclaimer and also features the unique Carter Trademark Detachable leather sweat system. The manufacturing tag lists the model or color as Graphic.... I couldn’t get a good photo of the whole tag as it is pinned in under the Carter detachable sweat buttons. Taking a guess at 1950s on this one with plastic liner tip protector.

View attachment 297102 View attachment 297103 View attachment 297112 View attachment 297113 View attachment 297114 View attachment 297115 View attachment 297116 View attachment 297117 View attachment 297118


I like the idea of simply unbuttoning a problem sweatband to detach it and being able to replace it in your own in a few seconds. Too bad these functions didn’t work out or catch on.
 

moehawk

I'll Lock Up
Messages
5,669
Location
Northern California
Hey all!
Here"s a refurb project I've been working on.
Almost a year ago I saw this hat on Etsy. Marked only with 'Brandon' and 'Showerproof', it just had something to it that caught my eye and held my attention. Several weeks of wembling later, I bought it. Didn't get pics of it out of the box, as it was in need of some steam and love before it was presentable.
I did get some pics of the sweat and tags and liner.

20210102_173619.jpg 20210102_173734.jpg 20210102_173710.jpg 20210102_173651.jpg

Unfortunately, shortly after I took these pics, the stitching holding the unreeded sweatband to the felt disintegrated.
Bummer.
As my vision was not up to the task of sewing in a new sweat, I considered sending it out to one of the hatters here on the Lounge, and then the world went crazy. I decided to save my money for important things like TP and hand sanitizer. Oh yeah, all that rice and dry beans too...
So the hat sat on a shelf, gathering dust and more wrinkles.
Then, a couple months ago, I went in for an eye exam, and found out that my declining vision was due to cataracts, not from a worsening of my retinopathy as I had feared. I got one eye done, then the other a month later. I'm still blind from the previous damage done by the diabetes, but now have a lot more light and color in my life, and a bit more detail as well. With the help of a pair of magnifying eyeglasses I decided to try a sweatband replacement. Turned out the old ribbon was disintegrating from age as well, so a full refurb was in order.
My sewing machine kept jamming as I tried to do the sweatband seam, so it took a few tries. My worst seam ever, looks like someone pulled all the pins out of the dude from Hellraiser's face and strung a shoelace through some of the holes. But it held together. And, if I shoot it like this nobody knows.

20210102_180456.jpg

Here's a few unblocked.

20210102_170544.jpg 20210102_170527.jpg 20210102_170515.jpg

Closeup of the brim.

20210102_165437.jpg

The brim is 2 1/2",the open crown a full 6. Originally 121g with the unreeded sweat. The thin, dense felt is 80g of the weight. Now 131g (or 118g 1without the liner, which is how I"m keeping it).
I haven't heard of Brandon as a hat maker, so I'm guessing it was a jobber hat. The tags, dimensions, brim treatment, unreeded sweat and general condition of the hat make me think pre-war, but as always opinions pro and con are welcome.
Head shot.

20210102_170429.jpg
 
Messages
19,124
Location
Funkytown, USA
Hey all!
Here"s a refurb project I've been working on.
Almost a year ago I saw this hat on Etsy. Marked only with 'Brandon' and 'Showerproof', it just had something to it that caught my eye and held my attention. Several weeks of wembling later, I bought it. Didn't get pics of it out of the box, as it was in need of some steam and love before it was presentable.
I did get some pics of the sweat and tags and liner.

View attachment 297426 View attachment 297427 View attachment 297429 View attachment 297430

Unfortunately, shortly after I took these pics, the stitching holding the unreeded sweatband to the felt disintegrated.
Bummer.
As my vision was not up to the task of sewing in a new sweat, I considered sending it out to one of the hatters here on the Lounge, and then the world went crazy. I decided to save my money for important things like TP and hand sanitizer. Oh yeah, all that rice and dry beans too...
So the hat sat on a shelf, gathering dust and more wrinkles.
Then, a couple months ago, I went in for an eye exam, and found out that my declining vision was due to cataracts, not from a worsening of my retinopathy as I had feared. I got one eye done, then the other a month later. I'm still blind from the previous damage done by the diabetes, but now have a lot more light and color in my life, and a bit more detail as well. With the help of a pair of magnifying eyeglasses I decided to try a sweatband replacement. Turned out the old ribbon was disintegrating from age as well, so a full refurb was in order.
My sewing machine kept jamming as I tried to do the sweatband seam, so it took a few tries. My worst seam ever, looks like someone pulled all the pins out of the dude from Hellraiser's face and strung a shoelace through some of the holes. But it held together. And, if I shoot it like this nobody knows.

View attachment 297439

Here's a few unblocked.

View attachment 297441 View attachment 297442 View attachment 297443

Closeup of the brim.

View attachment 297444

The brim is 2 1/2",the open crown a full 6. Originally 121g with the unreeded sweat. The thin, dense felt is 80g of the weight. Now 131g (or 118g 1without the liner, which is how I"m keeping it).
I haven't heard of Brandon as a hat maker, so I'm guessing it was a jobber hat. The tags, dimensions, brim treatment, unreeded sweat and general condition of the hat make me think pre-war, but as always opinions pro and con are welcome.
Head shot.

View attachment 297457

Nice job, John. I like the color, and I'm a sucker for brim stitching.
 
Messages
17,901
Location
Nederland
Stefan, Thank you! Your Stra Barbisio "Extra Lusso" is all around fantastic!
Thank you, Steve.

What, people don't like green hats? That's just crazy talk!
I know! Who would think of such a thing?;)

Given the price of these hats, the name "cashfelt" seems appropriate!:)

Another beauty!
Thanks, Randy.

New Year... New Stetson....
Stephen L Stetson - Never Connected in ANY Way

View attachment 297101

Stephen L Stetson - Olympic Quality - Graphic
4 1/2 crown as shaped (about 5 1/4 open)
1 inch black grosgrain ribbon
2 1/4 brim with 1/8 grosgrain binding

Stetson.. Stephen L Stetson. I’ve had a hankering for one of these SLS hats since I believe I saw @Redfokker post about his and the Stephen L Stetson story. @Randall Renshaw alerted me to this one a few weeks back and I couldn’t pass it up. A lot for me to like about this hat. Proportions work great... the felt feels very good in hand and responds very well. It includes the Never Connected in Any Way liner disclaimer and also features the unique Carter Trademark Detachable leather sweat system. The manufacturing tag lists the model or color as Graphic.... I couldn’t get a good photo of the whole tag as it is pinned in under the Carter detachable sweat buttons. Taking a guess at 1950s on this one with plastic liner tip protector.

View attachment 297102 View attachment 297103 View attachment 297112 View attachment 297113 View attachment 297114 View attachment 297115 View attachment 297116 View attachment 297117 View attachment 297118
The Stephen L Stetson story certainly is interesting. That's enough reason to go for this one. And it's a good looking hat as well.

Hey all!
Here"s a refurb project I've been working on.
Almost a year ago I saw this hat on Etsy. Marked only with 'Brandon' and 'Showerproof', it just had something to it that caught my eye and held my attention. Several weeks of wembling later, I bought it. Didn't get pics of it out of the box, as it was in need of some steam and love before it was presentable.
I did get some pics of the sweat and tags and liner.

View attachment 297426 View attachment 297427 View attachment 297429 View attachment 297430

Unfortunately, shortly after I took these pics, the stitching holding the unreeded sweatband to the felt disintegrated.
Bummer.
As my vision was not up to the task of sewing in a new sweat, I considered sending it out to one of the hatters here on the Lounge, and then the world went crazy. I decided to save my money for important things like TP and hand sanitizer. Oh yeah, all that rice and dry beans too...
So the hat sat on a shelf, gathering dust and more wrinkles.
Then, a couple months ago, I went in for an eye exam, and found out that my declining vision was due to cataracts, not from a worsening of my retinopathy as I had feared. I got one eye done, then the other a month later. I'm still blind from the previous damage done by the diabetes, but now have a lot more light and color in my life, and a bit more detail as well. With the help of a pair of magnifying eyeglasses I decided to try a sweatband replacement. Turned out the old ribbon was disintegrating from age as well, so a full refurb was in order.
My sewing machine kept jamming as I tried to do the sweatband seam, so it took a few tries. My worst seam ever, looks like someone pulled all the pins out of the dude from Hellraiser's face and strung a shoelace through some of the holes. But it held together. And, if I shoot it like this nobody knows.

View attachment 297439

Here's a few unblocked.

View attachment 297441 View attachment 297442 View attachment 297443

Closeup of the brim.

View attachment 297444

The brim is 2 1/2",the open crown a full 6. Originally 121g with the unreeded sweat. The thin, dense felt is 80g of the weight. Now 131g (or 118g 1without the liner, which is how I"m keeping it).
I haven't heard of Brandon as a hat maker, so I'm guessing it was a jobber hat. The tags, dimensions, brim treatment, unreeded sweat and general condition of the hat make me think pre-war, but as always opinions pro and con are welcome.
Head shot.

View attachment 297457
Glad to hear your eyesight has improved, John. I like the hat; nice colour on it and nice job saving it.
 

Forum statistics

Threads
107,260
Messages
3,032,390
Members
52,721
Latest member
twiceadaysana
Top