Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Footwear to go with our jackets

Edward

Bartender
Messages
24,779
Location
London, UK
I generally travel with sneakers, I found out that if I am wearing a boot then most of the time I will need to take them off, sneakers rarely.

I also avoid wearing a belt for the same reason, but I do wear my jeans at least lol

Security really is the biggest pain with flying now - one of several reasons I much prefer the train where practical. I'm just not a sneaker guy. Long haul in warmer weather I find penny loafers great - easily kicked off and on at security and on the plane, but not so ideal in Winter! Still, with the way the latest element of the 'rona is going, it looks like I might well have at least another year to track down alternatives, ha...

The best trick I discovered with a belt is to get one where you can unfasten a stud and remove the buckle from the belt - the leather strap doesn't set off alarms, and it's an awful lot less hassle than having to remove a belt fully. Mad we still have to do all that caper now they have those full body scanners where they can check us all out entirely, but hey ho.
 

Jin431

Call Me a Cab
Messages
2,912
Location
Bay Area CA
Benzein Side Zips (oiled camel shinki horse butt)

IMG_8731.jpg


IMG_8732.jpg


IMG_8736.JPG
 

marker2037

Practically Family
Messages
834
Location
Curacao/NJ, USA
So these John Lofgren Engineers were a bit of a gamble for me, in both style (first Engineer boot order) and size (sized down from the recommendation as it was the last one left and I wanted to try to avoid heel slip), not to mention the high price. I was nervous as hell today opening up the box to see if they fit. Upon initial inspection, they appeared smaller (and lighter, less bulky) than I was anticipating as I was holding them and sort of eyeballing the size comparing it to my foot before I even tried to slip them on. I got even more nervous.

First foot in was my smaller left, trying them on with my normal Chup socks and I got stuck right away in the shaft. Uh oh :confused:. Ok, I guess there is a bit of “wiggling” back and forth one must do with engineers. With some back and forth effort, they slid on finally, foot in bed. Ok, this one fits pretty well and snug, cautiously optimistic here, not a lot of room though inside.

Next foot. The dominant right, the bigger of the two. Let’s give this a whirl. Nope. Nope. And nope. :(

Yikes, no bueno. Felt like their was absolutely zero chance I could get my foot past the shaft, let alone see if the footbed fit. I grabbed a different sock, a lighter dress sock this time, and a plastic bag. Let’s see if that does the trick. Plastic did not help. Crap.

But what’s this? Wiggle, wiggle, wiggle…..wiggle, wiggle, wiggle? It’s…it’s going. Must. Get past. Heel counterrrrrr…. Success!!!! I’m in. Foot in bed. It’s snug, but it fits! Can I walk though? Yes. Not bad. Gets better with more walking and wearing. Actually, they feel great! Awesome even!

This leather is pretty stretchy being deerskin so I was actually eventually able to get in with the Chup socks as well the next time I put them back on and I feel the more I wear them, the better they will fit and be easier to get into.

I guess I made the right call on these after all. Phew! I do want to order another pair now is horse, but I wonder if the size would still be the correct one to go with or I should size up because since these are deerskin, they are just easier to stretch into. If they were horse, I might not be so lucky…not sure! Thoughts?

Burnt burgundy ezo deerskin.

FF97E640-641A-4FE6-B833-B6DFA5ADD080.jpeg
14560C24-A185-4F8D-9A77-F8ED58BA86B2.jpeg
5F38DF31-41E6-4DCA-B915-20B4EA7FE0A9.jpeg


1996385D-5A01-428E-BC4F-6068B40FA487.jpeg
 

BlueAltitudes

Familiar Face
Messages
55
Location
California
So these John Lofgren Engineers were a bit of a gamble for me, in both style (first Engineer boot order) and size (sized down from the recommendation as it was the last one left and I wanted to try to avoid heel slip), not to mention the high price. I was nervous as hell today opening up the box to see if they fit. Upon initial inspection, they appeared smaller (and lighter, less bulky) than I was anticipating as I was holding them and sort of eyeballing the size comparing it to my foot before I even tried to slip them on. I got even more nervous.

First foot in was my smaller left, trying them on with my normal Chup socks and I got stuck right away in the shaft. Uh oh :confused:. Ok, I guess there is a bit of “wiggling” back and forth one must do with engineers. With some back and forth effort, they slid on finally, foot in bed. Ok, this one fits pretty well and snug, cautiously optimistic here, not a lot of room though inside.

Next foot. The dominant right, the bigger of the two. Let’s give this a whirl. Nope. Nope. And nope. :(

Yikes, no bueno. Felt like their was absolutely zero chance I could get my foot past the shaft, let alone see if the footbed fit. I grabbed a different sock, a lighter dress sock this time, and a plastic bag. Let’s see if that does the trick. Plastic did not help. Crap.

But what’s this? Wiggle, wiggle, wiggle…..wiggle, wiggle, wiggle? It’s…it’s going. Must. Get past. Heel counterrrrrr…. Success!!!! I’m in. Foot in bed. It’s snug, but it fits! Can I walk though? Yes. Not bad. Gets better with more walking and wearing. Actually, they feel great! Awesome even!

This leather is pretty stretchy being deerskin so I was actually eventually able to get in with the Chup socks as well the next time I put them back on and I feel the more I wear them, the better they will fit and be easier to get into.

I guess I made the right call on these after all. Phew! I do want to order another pair now is horse, but I wonder if the size would still be the correct one to go with or I should size up because since these are deerskin, they are just easier to stretch into. If they were horse, I might not be so lucky…not sure! Thoughts?

Burnt burgundy ezo deerskin.

View attachment 384080 View attachment 384081 View attachment 384082

View attachment 384088

Dude, those are so awesome! I contemplated getting those when I saw they were taking pre-orders for those Lofgrens at S&S! They look very, very nice! Let me know how they break in. I can tell you that my Lofgren Chelsea boots are the best damn boots I've ever worn (not that I've worn many haha) and also that Lofgrens break in very nicely over time. Oh, also I sized down a half size according to their instructions and that it was right on. I would say that you should stick to the size because they'll break in very quickly.
 

Ayeteael

A-List Customer
Messages
333
Location
Atlanta
So these John Lofgren Engineers were a bit of a gamble for me, in both style (first Engineer boot order) and size (sized down from the recommendation as it was the last one left and I wanted to try to avoid heel slip), not to mention the high price. I was nervous as hell today opening up the box to see if they fit. Upon initial inspection, they appeared smaller (and lighter, less bulky) than I was anticipating as I was holding them and sort of eyeballing the size comparing it to my foot before I even tried to slip them on. I got even more nervous.

First foot in was my smaller left, trying them on with my normal Chup socks and I got stuck right away in the shaft. Uh oh :confused:. Ok, I guess there is a bit of “wiggling” back and forth one must do with engineers. With some back and forth effort, they slid on finally, foot in bed. Ok, this one fits pretty well and snug, cautiously optimistic here, not a lot of room though inside.

Next foot. The dominant right, the bigger of the two. Let’s give this a whirl. Nope. Nope. And nope. :(

Yikes, no bueno. Felt like their was absolutely zero chance I could get my foot past the shaft, let alone see if the footbed fit. I grabbed a different sock, a lighter dress sock this time, and a plastic bag. Let’s see if that does the trick. Plastic did not help. Crap.

But what’s this? Wiggle, wiggle, wiggle…..wiggle, wiggle, wiggle? It’s…it’s going. Must. Get past. Heel counterrrrrr…. Success!!!! I’m in. Foot in bed. It’s snug, but it fits! Can I walk though? Yes. Not bad. Gets better with more walking and wearing. Actually, they feel great! Awesome even!

This leather is pretty stretchy being deerskin so I was actually eventually able to get in with the Chup socks as well the next time I put them back on and I feel the more I wear them, the better they will fit and be easier to get into.

I guess I made the right call on these after all. Phew! I do want to order another pair now is horse, but I wonder if the size would still be the correct one to go with or I should size up because since these are deerskin, they are just easier to stretch into. If they were horse, I might not be so lucky…not sure! Thoughts?

Burnt burgundy ezo deerskin.

View attachment 384080 View attachment 384081 View attachment 384082

View attachment 384088

Fantastic boots and writeup. So I've got a pair of engineers in super thick horsebutt from Flame Panda. They are incredibly difficult to put on. My feet keep getting stuck in the area where the shaft meets the counter. I took them to a cobbler to stretch but it didn't really provide me any relief. I tried wearing them with only dress socks, but the leather is so thick I barely made a dent in the break-in.

Faced with the dilemma of selling a very unique pair of boots or suffering through an untold breakin-in period, I took drastic measures. My cobbler is installing side zips along the inside of each boot. I hope I don't come to regret this decision, but given the thick horsebutt Peng used, I didn't see any other pain-free solution. I'll post pics when they're done.
 

marker2037

Practically Family
Messages
834
Location
Curacao/NJ, USA
Fantastic boots and writeup. So I've got a pair of engineers in super thick horsebutt from Flame Panda. They are incredibly difficult to put on. My feet keep getting stuck in the area where the shaft meets the counter. I took them to a cobbler to stretch but it didn't really provide me any relief. I tried wearing them with only dress socks, but the leather is so thick I barely made a dent in the break-in.

Faced with the dilemma of selling a very unique pair of boots or suffering through an untold breakin-in period, I took drastic measures. My cobbler is installing side zips along the inside of each boot. I hope I don't come to regret this decision, but given the thick horsebutt Peng used, I didn't see any other pain-free solution. I'll post pics when they're done.
Thanks!

That's a choice I never hope to have to make, which is actually why I chose deerskin as my first engineer. I knew they would be more flexible and stretchy. The shaft to heel counter area is the problem I assume everyone faces, so yea good luck with your solution!

For my next pair, I'm choosing either black CXL or the Havana horsehide. Maybe both eventually. I really like these so far.

I should have added in my original post, that I would KILL for a leather jacket in this Ezo Shika deerskin. It's incredible.
 

Ayeteael

A-List Customer
Messages
333
Location
Atlanta
Engineers just may not be for me, given my wide feet. If I try another pair, I will certainly pick a softer, more pliable leather. Thick horsebutt was a miscalculation on my part. I got wiped up in the current horsebutt frenzy.
 
Last edited:
Messages
10,379
Location
vancouver, canada
Security really is the biggest pain with flying now - one of several reasons I much prefer the train where practical. I'm just not a sneaker guy. Long haul in warmer weather I find penny loafers great - easily kicked off and on at security and on the plane, but not so ideal in Winter! Still, with the way the latest element of the 'rona is going, it looks like I might well have at least another year to track down alternatives, ha...

The best trick I discovered with a belt is to get one where you can unfasten a stud and remove the buckle from the belt - the leather strap doesn't set off alarms, and it's an awful lot less hassle than having to remove a belt fully. Mad we still have to do all that caper now they have those full body scanners where they can check us all out entirely, but hey ho.
I made the mistake of flying and wearing slip on shoes. When we landed the shoes I had taken off no longer fit my swollen feet and I had to walk off the plane in my socks! Only tie ups that don't leave my feet from now on.
 

Bfd70

I'll Lock Up
Messages
4,047
Location
Traverse city
So these John Lofgren Engineers were a bit of a gamble for me, in both style (first Engineer boot order) and size (sized down from the recommendation as it was the last one left and I wanted to try to avoid heel slip), not to mention the high price. I was nervous as hell today opening up the box to see if they fit. Upon initial inspection, they appeared smaller (and lighter, less bulky) than I was anticipating as I was holding them and sort of eyeballing the size comparing it to my foot before I even tried to slip them on. I got even more nervous.

First foot in was my smaller left, trying them on with my normal Chup socks and I got stuck right away in the shaft. Uh oh :confused:. Ok, I guess there is a bit of “wiggling” back and forth one must do with engineers. With some back and forth effort, they slid on finally, foot in bed. Ok, this one fits pretty well and snug, cautiously optimistic here, not a lot of room though inside.

Next foot. The dominant right, the bigger of the two. Let’s give this a whirl. Nope. Nope. And nope. :(

Yikes, no bueno. Felt like their was absolutely zero chance I could get my foot past the shaft, let alone see if the footbed fit. I grabbed a different sock, a lighter dress sock this time, and a plastic bag. Let’s see if that does the trick. Plastic did not help. Crap.

But what’s this? Wiggle, wiggle, wiggle…..wiggle, wiggle, wiggle? It’s…it’s going. Must. Get past. Heel counterrrrrr…. Success!!!! I’m in. Foot in bed. It’s snug, but it fits! Can I walk though? Yes. Not bad. Gets better with more walking and wearing. Actually, they feel great! Awesome even!

This leather is pretty stretchy being deerskin so I was actually eventually able to get in with the Chup socks as well the next time I put them back on and I feel the more I wear them, the better they will fit and be easier to get into.

I guess I made the right call on these after all. Phew! I do want to order another pair now is horse, but I wonder if the size would still be the correct one to go with or I should size up because since these are deerskin, they are just easier to stretch into. If they were horse, I might not be so lucky…not sure! Thoughts?

Burnt burgundy ezo deerskin.

View attachment 384080 View attachment 384081 View attachment 384082

View attachment 384088
Beautiful boots, but how can you stand them without taller socks?
 

Edward

Bartender
Messages
24,779
Location
London, UK
I made the mistake of flying and wearing slip on shoes. When we landed the shoes I had taken off no longer fit my swollen feet and I had to walk off the plane in my socks! Only tie ups that don't leave my feet from now on.

Not a problem I've encountered - though certainly they are tighter. Funnily enough, though, I did once have a pair I loved but that in the end were just too loose (what they sold as a UK 8 was really close a UK9 / US10), even with an insole. They always, with the insole, fit just right when I got off the plane, but never again much more than an hour later. Just enough in it that a pair of bootsocks made them viable with an insole, but...
 

Forum statistics

Threads
107,210
Messages
3,031,119
Members
52,681
Latest member
CCRider
Top