Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Show us your Guns!

Stearmen

I'll Lock Up
Messages
7,202
Oh nice! the only thing you find at the local gun shows around here is table after table of M16 variants and pieces. Dull? man!
Tell me about it! Here it's table after table of 9mm, with questionable people looking at them. The few antique dealers want museum prices for their stuff.
 

jkingrph

Practically Family
Messages
848
Location
Jacksonville, Tx, West Monroe, La.
Oh nice! the only thing you find at the local gun shows around here is table after table of M16 variants and pieces. Dull? man!

Don't forget the tables of jewlery, and cheap printed T-shirts. What does all that have to do with guns.

Once in a while I come across something good, like the little sleeper of a Ruger #1 light rifle in 7x57 I found, excellent metal but the stock finish was clouded so you could not see wood underneath, except for the few spots missing. It turned out to be one of the prettiest little rifles I have, and for $325 was a bargin. Then the 2 digit serial no Swedish Mauser made by Oberndorf, or the other Swed I picked up a couple of years later for a song, dealer had two that weekend and I should have grabbed both. Lastly was the 16ga Charlin, sxs sliding breech shotgun. They had a high price on it fishing, so I went home and did some research and got it a week later for less than half the asking price
 

DeaconKC

One Too Many
Messages
1,727
Location
Heber Springs, AR
Couldn't resist taking a pic of these 2 together. A modern Tommygun and a genuine 1917 built S&W Model 1917.
006-1.jpg
 

KilroyCD

One Too Many
Messages
1,966
Location
Lancaster County, PA
When it rains, it pours...

The other day I posted about the Francotte-pattern Martini I bought at a gun show last weekend. I bought that because I had placed an absentee bid on a Martini Mk.II at an auction on Saturday, and since I didn't hear from the auction house on Saturday I figure my bid wasn't high enough. Monday I received notification that I was indeed the high bidder, so here is my latest: an 1877 Martini-Enfield Mk.II smooth bore (for prison guard and /or police use).

Picture185.jpg
 

Rathdown

Practically Family
Messages
572
Location
Virginia
The other day I posted about the Francotte-pattern Martini I bought at a gun show last weekend. I bought that because I had placed an absentee bid on a Martini Mk.II at an auction on Saturday, and since I didn't hear from the auction house on Saturday I figure my bid wasn't high enough. Monday I received notification that I was indeed the high bidder, so here is my latest: an 1877 Martini-Enfield Mk.II smooth bore (for prison guard and /or police use).
Picture185.jpg
Interesting comment about the smooth bore being for prison guard/or police use. I was under the impression that these rifles had been re-bored (as smooth bores) so that they could be owned with a shotgun license which (in the UK) was much easier to obtain than a large bore rifle permit. The major UK importer of these smooth bore Martinis used to make much of the fact in their advertisements that only a shotgun certificate was required to purchase one of these "Zulu war" rifles.
 

KilroyCD

One Too Many
Messages
1,966
Location
Lancaster County, PA
Interesting comment about the smooth bore being for prison guard/or police use. I was under the impression that these rifles had been re-bored (as smooth bores) so that they could be owned with a shotgun license which (in the UK) was much easier to obtain than a large bore rifle permit. The major UK importer of these smooth bore Martinis used to make much of the fact in their advertisements that only a shotgun certificate was required to purchase one of these "Zulu war" rifles.
Those shotgun conversions are likely to retain their original rear sight, or perhaps have had the rear sight removed. Those that were modified for police and/or prison guard use were fitted with the fixed rear sight, as this one has. This was common throughout the Empire, as I have even seen examples of a Nepalese Martini variant called a Gahendra equipped the same way. Those had been modified for prison guard use.
 

MikePotts

Practically Family
Messages
837
Location
Tivy, Texas.
Not vintage either, but Her Ladyship fancies herself the family 'sniper' so here's her St.Valentine's Day gift:

P1010188-1.jpg


Rem.700 Tactical .223 w/ Vari-XIII 2.5-8 x36
 

MikePotts

Practically Family
Messages
837
Location
Tivy, Texas.
Very nicely chosen!

Yours too Deacon,
I had a friend who was a SEAL sniper (Navy Silver Cross and my tactical gun guru) before they had SEALS (was that the UDT?) and his EDC was a KelTec 9mm, the model before yours, from the day they first became available... about 16 years ago?

MP
 

Roving_Bohemian

One of the Regulars
Messages
250
Location
Dunn County, Wisconsin
Until I can afford the SIG P229SAS I have my eye on,
IMG_0483.jpg


my edc is my uncle's Kel-Tec P11 (9mm) he's loaning me.

Although I prefer "real-steel" I have to say, that KT really "disappears" in a yaqui-slide at 4:25, though eventually I intend to get a holster like this one
Kel-Tec-P11-Holster.jpg
 

DeaconKC

One Too Many
Messages
1,727
Location
Heber Springs, AR
Old Rogue, the PF9 has been an excellent carry gun. It is a single stack 9x19, very flat, with excellent sights. I ran 300 rounds of FMJ through it when I got it, and it has never jammed once. It feed JHPs perfectly, rides in a pants pocket very comfortably or in an IWB holster. It is not a gun to teach a beginner on, as it is very light and definitely has some snap to it's recoil. I will probably have the slide refinished with a more sweat resistant finish, maybe one of the Spray and bake ones from Brownell's.
 

Old Rogue

Practically Family
Messages
854
Location
Eastern North Carolina
Old Rogue, the PF9 has been an excellent carry gun. It is a single stack 9x19, very flat, with excellent sights. I ran 300 rounds of FMJ through it when I got it, and it has never jammed once. It feed JHPs perfectly, rides in a pants pocket very comfortably or in an IWB holster. It is not a gun to teach a beginner on, as it is very light and definitely has some snap to it's recoil. I will probably have the slide refinished with a more sweat resistant finish, maybe one of the Spray and bake ones from Brownell's.

Thanks! You may want to contact Kel-Tek and tell them you just earned yourself a commission on the sale of a PF9!
 

Forum statistics

Threads
108,674
Messages
3,065,723
Members
53,807
Latest member
JPDuran
Top