Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Show us your Stingy Brims

Messages
10,397
Location
vancouver, canada
Ah-ha! As the OP, I started this thread with the arbitrary brim width of less that 2 3/8 inches. Not everyone will agree with this “definition,” but I’ve given up trying to get universal acceptance on most anything. I think our 2 1/4” brims count for stingies (they sure look stingy on my giant melon).
OK that fits for me. My totally arbitrary limit is 2 1/4" but can live with stretching it a bit.
 
Messages
10,962
62018B68-69DB-4CA0-8AC9-C20BE122CD88.jpeg


Kicking off StingeMas Stingy Week hoping for a stingy performance for my Miami Dolphins defense against the number one offense and defending Super Bowl Champion Kansas City Chiefs. Hehe. Lots of luck :)

Black Cavanagh with 1 7/8 brim sporting a Cavanagh edge. I stingily covered up the 1 7/8 black grosgrain ribbon with my home made Dolphins colors ribbon held on with a couple magnets. This one I found with my own initials on the sweat and it also gifted me a not to stingy Dobbs Guild edge that arrived along it it.

And as I type this Patrick Mahomes Is picked off by Byron Jones... so your telling me there’s a chance!

B86DCE20-CCF5-4B85-8598-708820F6987D.jpeg
AE6E7D96-118B-4745-80B5-7381331645D3.jpeg
A315C3B2-BF3B-42C6-A99A-C8814A6499E3.jpeg
1FE4C000-4E85-44AA-A4E7-3EC85938FB49.jpeg
887E12E1-D8F6-4C1F-B79B-10B309DACE55.jpeg
9027FC06-E465-4BA1-B969-89A7717BA6D7.jpeg
6A82DA30-E741-48E4-9D76-820DB5DF9A7F.jpeg
78D78856-C820-4C51-8D81-0E8715CEA021.jpeg






Happy StingeMas!
 
Last edited:
Messages
12,384
Location
Albany Oregon
In solidarity with Joe McCarthy @Blare of Fedora Lounge fame, I begin my submissions to "Stingy-mas" for this season. Had to go to the store to get what I forgot yesterday (yes, at my age YOU DO have to write it down) so I thought it would be a perfect trip for a "slim-brim" hat. This longhair nap is by Penn-Craft, of England. The brand was a 1930s American brand bought up by Stetson. They sold the name to a British manufacturer (can't remember the name) and they resurrected the brand. This hat was made in 1962. It is also the only hat I have with a feather still in it. It was asking for one...
13Dec20 Penn Craft front smile 550x.jpg
21Dec18 Penn Craft profile 550x.jpg
12Sep18 Penn Craft logo 400x.jpg
28Oct18 Penn Craft Liner 450x.jpg
 

Rmccamey

I'll Lock Up
Messages
5,667
Location
Central Texas
Looming great, gents.

Knox Custom 2” brim:

View attachment 289356 View attachment 289357 View attachment 289358

One of the only hats I own that kept its feather (raindrops in brim).
In solidarity with Joe McCarthy @Blare of Fedora Lounge fame, I begin my submissions to "Stingy-mas" for this season. Had to go to the store to get what I forgot yesterday (yes, at my age YOU DO have to write it down) so I thought it would be a perfect trip for a "slim-brim" hat. This longhair nap is by Penn-Craft, of England. The brand was a 1930s American brand bought up by Stetson. They sold the name to a British manufacturer (can't remember the name) and they resurrected the brand. This hat was made in 1962. It is also the only hat I have with a feather still in it. It was asking for one...
View attachment 289360 View attachment 289361 View attachment 289362 View attachment 289363
 
Messages
11,912
Location
Southern California
Oh, we're starting. Okay then, I guess I'll start with the stingy brim that started it all for me:

No6UkTO.jpg


This is a Winston Fedora that started life with a Center Dent crease. Fellow Lounger Historyteach24 had given it the Telescope crease you see in the photos on the left in order to give it more of a Pork Pie look. He listed it for sale in the classifieds back in March of 2016, it caught my eye, and a deal was made. I had to give it the Teardrop crease in the photos on the right so it would fit on my head, and that was that. It took a little while to get used to the crown being shorter than the other hats I had at the time, but I eventually realized I was the only person who noticed. It's moth-eaten, but that barely shows in the photos so...

8UUp98t.jpg


Oh, I apologize for using old photos, but my laptop died and my wife's doesn't have any photo editing software, so new photos aren't possible at the moment.
 
Messages
12,384
Location
Albany Oregon
Oh, we're starting. Okay then, I guess I'll start with the stingy brim that started it all for me:

No6UkTO.jpg


This is a Winston Fedora that started life with a Center Dent crease. Fellow Lounger Historyteach24 had given it the Telescope crease you see in the photos on the left in order to give it more of a Pork Pie look. He listed it for sale in the classifieds back in March of 2016, it caught my eye, and a deal was made. I had to give it the Teardrop crease in the photos on the right so it would fit on my head, and that was that. It took a little while to get used to the crown being shorter than the other hats I had at the time, but I eventually realized I was the only person who noticed. It's moth-eaten, but that barely shows in the photos so...

8UUp98t.jpg


Oh, I apologize for using old photos, but my laptop died and my wife's doesn't have any photo editing software, so new photos aren't possible at the moment.
Very impressive! It is on the slim end of stingy for sure. That ribbon treatment is truly spectacular! You just don't see this in a hat of the late 50s era very often. Nice.
 
Messages
12,384
Location
Albany Oregon
On the second day of Stingymas, I opened my Brimvent calendar to find a nice gray work hat. The Hat City Hat Co. of Danbury Conn. produced some very affordable (low end) hats during the late 1950s. Since I'll be puttering around the house today, I thought that this 2" Stingy would be appropriate for the Stingymas season.

30Jan19 Hat City front 450x.jpg
30Jan19 Hat City side 450x.jpg
Hat City Hat Co Liner tip Logo.jpg
 
Messages
10,962
On the second day of StingyMas we attended a socially distanced outdoor wedding. I went with this beautiful dark blue 1950s Dobbs Twenty that came to me via @jlee562

609C3FB7-C761-495F-A2E3-D1514E5E17C9.jpeg


It is very possible this one did not start its life out as a short brim and at some point had its wider brim with guild edge trimmed and restored with expert care as the brim has wonderful blind stitching possibly in a masterfully attempt to replicate the Cavanagh edge. The brim now checks into Stingyville at 2 inches and sports a 4 3/4 crown as shaped.

C2A4EBCE-77C6-433B-A798-483F3B2EA489.jpeg
60EA55F7-7545-45F3-8F4C-1FDE98802C06.jpeg
9A4E0CB1-C790-489B-AD85-604F66CD5857.jpeg
2DCC19C5-1BF5-4ADB-91F0-C959EC8EA760.jpeg
724FEA22-15FF-4ED2-BFE1-69EA79119D3F.jpeg
BFFA6404-9CF8-4DAC-8E3F-92BEB4D11867.jpeg
901612D7-9AF2-4005-8B15-274723B1B466.jpeg
B642872B-4EE5-43CA-91C6-06F5E41D3A95.jpeg
 
Last edited:
Messages
11,912
Location
Southern California
Very impressive! It is on the slim end of stingy for sure. That ribbon treatment is truly spectacular! You just don't see this in a hat of the late 50s era very often. Nice.
The brim on that Winston measures right at 2", but I think the low tapered crown makes it seem a bit wider. I haven't been able to find any information about when it might have been made, but I think the style suggests 50s so I'm going with that until something says different.

Up next is this goofy bastid, an even stingier inexpensive cotton thing with the name "Mirmaru" on a tag sewn to the back of the cotton sweatband. A cheap Amazon purchase, it was listed as "black" but has obviously had some sort of "weathering" treatment similar to the "acid wash" denim of decades ago.

J75EAwe.jpg


When it's flattened out the brim on this turkey comes in at 1-1/4", so it's the hat I own with the stingiest brim; it looked wider in the sales photos.
 
Messages
10,962
A couple more additions for the second day of StingyMas

Here are two hats a bit large for me at 7 3/8 so they will be re-homed. If either are to anyone’s liking let me know.

Dobbs Cameron - Guild Edge - West Point (Taupe) 7 3/8

409DA273-741A-4145-BD29-2B20EEDEA879.jpeg


Dobbs Cameron - West Point (Taupe) 7 3/8
(prob Late 50s early 60s)
4 3/4 to peak of crown as shaped (about 5 1/4 open)
2 inch black grosgrain ribbon
2 inch brim with Guild Edge
1 3/4 Brown Sweatband

Here is a Dobbs Cameron with Guild Edge. I believe the color to be West Point a sort of Taupe color. It’s crown as shape is about 4 3/4 to the peak and about 5 1/2 inches open crowned. The 2 inch black grosgrain ribbon has a faded tan gradient in the middle of the bow that gives is a great vintage look. The Cavanagh edge (Guild Edge) brim is right at two inches. The brown 1 3/4 sweatband does have a few small cracks but over all is soft and supple and seems to have some life left in it for sure. It does not have a liner. Im guessing this one to be late 50s to early 60s.. probably on the 60s side. This hat originally sold for $16.50

321B451B-E7E0-4350-946C-CA0B3017FA5B.jpeg
B90C2B73-8AD7-4AFC-9670-999819A372B5.jpeg
FA9F34FE-35F9-4A61-81DF-50A48F14A2B1.jpeg
63489F9C-C44F-45E3-BBDE-2EE1074434F9.jpeg
52CF04D6-DAC4-443B-A4FF-1E43527ADFD3.jpeg
9731F468-2087-48E2-AF66-45CE783E8A60.jpeg
2404E919-4585-44D8-81FC-8E263AAD1E91.jpeg
7171ED74-8993-4964-AFBE-5F12A951E5AD.jpeg
C45E876B-8B34-453B-BB18-2DE4461D98F4.jpeg
 
Last edited:
Messages
10,962
Dobbs Wide Ribbon Back bow 7 3/8

07408BAB-482A-4E7E-BC94-5974805E5DDE.jpeg


Dobbs Wide Ribbon Back bow
Late 1950s/Early 1960s
Brownish/charcoal grey felt
4 1/8 crown as shaped with wide center dent
2 1/2 black grosgrain ribbon
2 inch brim with overwelt
1 7/8 soft brown sweatband with “Headspring”

AA881E8F-BB7B-495B-82EE-C792A28E2D93.jpeg
92182975-3668-48D7-B42B-3FF76F7D1F31.jpeg
5A5AA7A9-5375-4410-856B-051F155AC1C9.jpeg
EEDB6115-9723-4F56-BE60-5A136C19EA22.jpeg
3D63AED9-C616-4954-9781-BCFC8A8E162F.jpeg
90A426B5-67BE-4123-BCDB-58A8F7D09DB6.jpeg
F15CC8BC-47DB-48B4-B1CD-3599953EB4A6.jpeg
07312089-4F3B-414D-8965-762FAD3C67F2.jpeg
7761866B-91BE-4438-9671-85E287A433C7.jpeg


Another 7 3/8 to come tomorrow


Happy StingyMas to one and all.
 

Forum statistics

Threads
107,310
Messages
3,033,630
Members
52,748
Latest member
R_P_Meldner
Top