Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Balmoral Boots

bigshoe

One of the Regulars
Messages
192
Location
Laramie Wyoming
It is a type of balmoral that allows the use of a gusset tounge.
Picturesprecrash179.jpg
 

Isshinryu101

One Too Many
Messages
1,328
Location
New Jersey
This is a pair of open tab balmorals I made for myself the galosh is elephant and the shaft is French calf. It has a half gusset tounge and vibram heel. I made it as a work boot
tomsnewshoes1.jpg

Very nice work! However, they are Derby Boots. Open lacing = Derby/ blucher. Closed lacing = balmoral/ oxford.
 

Papperskatt

Practically Family
Messages
506
Location
Sweden
Very nice work! However, they are Derby Boots. Open lacing = Derby/ blucher. Closed lacing = balmoral/ oxford.
Not entirely correct, at least not traditionally. While nowadays the terms balmoral and oxford are pretty much interchangeable, that hasn't always been the case.

The characteristic of a balmoral is not the lacing but the horizontal side seam, instead of the more common curved seam. While most balmorals have closed oxford lacing, a derby with a horizontal side seam would be classified as a balmoral. The advantage of the horizontal seam is that it makes the boots/shoes more waterproof.

That means that for example the Allen Edmonds Fifth Street boots and the vintage boots posted by LuvMyMan on the previous page are technically oxford boots and not balmoral boots, while the discussed boots by bigshoe, while derbys, are indeed balmorals.

That said, I agree that oxford boots are what this thread is about, regardless of the title.
 
Last edited:

Two Types

I'll Lock Up
Messages
5,456
Location
London, UK
This is a pair of open tab balmorals I made for myself the galosh is elephant and the shaft is French calf. It has a half gusset tounge and vibram heel. I made it as a work boot
tomsnewshoes1.jpg

I used to be able to find really heavy duty Polish work boots in that Balmoral style. I don't think I've seen any for 20 years.
 

Two Types

I'll Lock Up
Messages
5,456
Location
London, UK
They have quite a shaped heel for an army boot.

They are quite similar to the Polish work boots, although the work boots had a padded top.
 

Isshinryu101

One Too Many
Messages
1,328
Location
New Jersey
Not entirely correct, at least not traditionally. While nowadays the terms balmoral and oxford are pretty much interchangeable, that hasn't always been the case.

The characteristic of a balmoral is not the lacing but the horizontal side seam, instead of the more common curved seam. While most balmorals have closed oxford lacing, a derby with a horizontal side seam would be classified as a balmoral. The advantage of the horizontal seam is that it makes the boots/shoes more waterproof.

That means that for example the Allen Edmonds Fifth Street boots and the vintage boots posted by LuvMyMan on the previous page are technically oxford boots and not balmoral boots, while the discussed boots by bigshoe, while derbys, are indeed balmorals.

That said, I agree that oxford boots are what this thread is about, regardless of the title.

Any thing with a full horizontal seam is a balmoral

Both 100% correct. Apologies for the misuse of the term of art. I was coming from a more modern view based on the aesthetic of the oxford boot being more "dressy" and the derby more "casual". Modern styles have repositioned the above posted boots as closer to a "work boot" than a "dress boot".
 

bigshoe

One of the Regulars
Messages
192
Location
Laramie Wyoming
The heel was tapered as I had to fit a size 13 boot to a size 9 original polish heel plate. A very good point, modern styles have changed the names for example this is my repro of a 1930's U.S. Navy work boot issued to enlisted sailors, today it is a dress boot.
navydeckboots14.jpg
 

Isshinryu101

One Too Many
Messages
1,328
Location
New Jersey
The heel was tapered as I had to fit a size 13 boot to a size 9 original polish heel plate. A very good point, modern styles have changed the names for example this is my repro of a 1930's U.S. Navy work boot issued to enlisted sailors, today it is a dress boot.
navydeckboots14.jpg

100% work boot stylewise.
 

LuvMyMan

I’ll Lock Up.
Messages
4,558
Location
Michigan
The heel was tapered as I had to fit a size 13 boot to a size 9 original polish heel plate. A very good point, modern styles have changed the names for example this is my repro of a 1930's U.S. Navy work boot issued to enlisted sailors, today it is a dress boot.
navydeckboots14.jpg


You made that? WOW! Super nice work. Somewhere in our home here is a big tote plastic container that has some vintage boots in it. A few pairs are similar to this boot here, but, have true spade soles. The boots in your picture as simple as they are looks wise, have an appeal due to just being so clean, neat looking without the overall shape being "played with" by punching/brogue work. MY husband desires to make shoes and boots, and we so appreciate the skill set it takes to make them.
 

herringbonekid

I'll Lock Up
Messages
6,016
Location
East Sussex, England
National Cloak and Suit Company, Fall-winter 1919-20:

national_campc_co_fw_19-20_zps082f6438.jpeg


National Cloak and Suit Company, Fall-winter 1922-23. Balmoral with tarsal strap effect, here called 'saddle strap':

national_campc_co_fw_22-23_zpsfa4ba91c.jpeg


Chicago Mail Order Company, Fall-Winter 1921. ditto, here called 'ball strap':

chicago_mail_order_co-f-w-21_zps393454c6.jpeg
 
Last edited:

simonc

Practically Family
Messages
918
Location
United Kingdom
I'm very hot on how the toe box is totally flat (a feature sorely overlooked these days) and the heel is like a good 1 3/4" to 2"
 

Forum statistics

Threads
108,940
Messages
3,071,123
Members
54,003
Latest member
brendastoner
Top