Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Feet Up! The Work Boot Thread

bretron

Call Me a Cab
Messages
2,518
Location
NW
Lol! In that case do yourself a favor and buy two pairs- one in brown dress and one in British Tan :D ;)
 

casechopper

My Mail is Forwarded Here
Messages
3,783
Location
Northern NJ
Another pair of White's smoke jumpers that I picked up from a fellow lounger
IMG_9038.JPG
 
Late 1980's Browning kangaroo leather boots. I typically get 10+ years out of these (this is the third pair) and I still have two dead-stock pairs in reserve. The first two pairs are still around and get used for brush-fire, roofing, concrete work, etc. I usually only wear these on the weekends as my day-time job doesn't require them. I wore them deer hunting this fall as they went with the '40s era outfit I wore better than the camo muck boots. :)

Bob
 

Attachments

  • Browning Boots.jpg
    Browning Boots.jpg
    196.6 KB · Views: 227

gaseousclay

Familiar Face
Messages
63
Another pair of White's smoke jumpers that I picked up from a fellow lounger
IMG_9038.JPG

The thing I dislike about White's is the stacked heel I see on a lot of their boots. Makes it look like you're wearing high heels. Just my observation on their aesthetics. Do they not sell a traditional cap toe boot without a stacked heel?


Sent from my iPhone using Tapatalk
 

casechopper

My Mail is Forwarded Here
Messages
3,783
Location
Northern NJ
You can get White's with a block heel or a lower heel. The cuban heel that they use is sort of their trademark and also is part of their Arch-Ease arch support. I can see where this can look odd to some. If you were to get a pair without the thick lug sole/heel then the boot would sit quite a bit lower.
 

gaseousclay

Familiar Face
Messages
63
You can get White's with a block heel or a lower heel. The cuban heel that they use is sort of their trademark and also is part of their Arch-Ease arch support. I can see where this can look odd to some. If you were to get a pair without the thick lug sole/heel then the boot would sit quite a bit lower.

Thanks. I'll have to browse their site and see what they have. How would you rate the comfort of their boots?


Sent from my iPhone using Tapatalk
 

casechopper

My Mail is Forwarded Here
Messages
3,783
Location
Northern NJ
They are very comfortable when broken in. They're pure torture while breaking them in. Unless you really need it I wouldn't go for high boots or the thicker stiffer leathers as they're much heavier and stiffer.
 

pak

One of the Regulars
Messages
230
Location
Ak
In my experience, correctly fitted boots and shoes when new should not hurt your feet. This means harm your feet with blisters, hotspots etc. Boots and shoes can be stiff and it will take time for the leathers to take the creases. To describe the break in as torture indicates, to me, you do not have a correct fit. Also, the thickness and material of the sole makes quite a difference to break in time. The big lug vibram type sole being the longest.
 

casechopper

My Mail is Forwarded Here
Messages
3,783
Location
Northern NJ
I have 4 different pairs of smoke jumpers right now. All are 10d size. Only one pair (the smooth standard black ones) hurt. The leather is rougher on the inside and it's much stiffer than that of the other pairs that I have.
 

pak

One of the Regulars
Messages
230
Location
Ak
Have you ever had your feet measured and fitted to any of these boots? If not, I highly recommend you do so by a White's approved rep or at White's. Here is why, having the boots custom fitted will take in consideration the differences between your left and right feet, which can be quite substantial. If you have bunions, spurs or other conditions the maker can fit for that also. These boots ain't cheap and they should fit accordingly. If you are buying off e-bay then your are taking a risk. Even at a lower price, expensive ill fitting White's ain't cheap.
 

pak

One of the Regulars
Messages
230
Location
Ak
I would like to add my comments can be applied to many of the quality bootmakers e.g. Nicks, Wesco's, Hoffman etc.
 

wdw

One Too Many
Messages
1,260
Location
Edinburgh
Sheepdog, I have the Muleskinners and really like them. Only one thing, dont wear them with raw selvedge if the dye is likely to run.

I made that mistake and now I have big stains on the boots I can't get rid of. The rough out leather just soaks the dye in.
 

LouisBailie

Banned
Messages
324
Location
in my house
I got a real good price on a pair of Wesco Job masters in 10E from a member here. The are fully lined and stitched with kevlar, had kevlar laces, and made in late 2005-6 so the thicker leather. The soles and heels are the now discontinued softer red cross lug sloes, the most comfortable Vibram have ever offered.

Once out of the box and cleaned up, I immediately put them on the ultra cam and moved them to 10.75D, then placed Superfeet copper liners inside. When they were on the Cametti I sanded the vamps with 2000 grit paper to remove the slight scraps and let them dry over night. I have to soak the leather real well to stretch them.

When I removed them from the stretcher I began treating the leather, knowing Wescos like to have lots of Huberds, I treated them until they were wet looking and then let that last coat absorb and seal. It took almost 1/2 pint of Huberds to treat the the leather because is very thick and was very dry. I used a heat gun and the leather soaked the treatments up like a thirsty dog. Once dry I laced them up with new 3/16 leather laces.

I wore them all day and they are stretching and contouring to my feet very nicely, I figure it will take 4-5 wearings then recoating with Huberds to get the leather fully flexible and form fitting. Then they will be just like there 30 year cousin engineer boots, I wear.
 

Forum statistics

Threads
107,025
Messages
3,026,638
Members
52,528
Latest member
Zonko
Top