Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Cross zip nation

regius

My Mail is Forwarded Here
Messages
3,297
Location
New York
Ok, moment of truth. The leather: liberty black horsehide, good hand, good weight, feels a bit more like Eastman’s “American walnut Warhorse®” than Aero’s Vicenza. Maybe black Vicenza, certainly thicker than Eastman. The fit: all the measurements were done spot on. I feared it may be too large at the chest but it’s fine. The pattern: this one could use improvement, but I’m in no position to judge as I have not seen the original in person, overall it is a fairly straight up and down pattern, the shoulder seam (seam between front panel and back panel) is situated in the middle of the shoulder on the frontal plane, unlike some pattern that it angles backward and creating a rounded deltoid (which I personally like), if you are not sure of this detail, just observe your jacket hanging on a hanger and see if the seam rests on top of the hanger or falls backward. The details: job well done on the complicated D pocket. It has a lining through the vertical zipper pocket as well as through the hand entry, I need to figure how it’s made! They used a 60s Talon for front zipper (I may be wrong). Back pleates are beautiful. Blacked double D, I can cinched and artificially create a V shaped back. The side belts are raw-edged, instead of folded in half, this is accurate to many originals. Armhole a little low but typical of the era, again, can’t judge. Very happy overall. I would make it differently (pattern wise), but until I do, I wouldn’t say I can do better.
 

Attachments

  • 2C59BFA0-617E-42F8-AA34-B75A8B3487E4.jpeg
    2C59BFA0-617E-42F8-AA34-B75A8B3487E4.jpeg
    5.9 MB · Views: 504
  • 85463324-D772-46D6-A752-7DE985F92397.jpeg
    85463324-D772-46D6-A752-7DE985F92397.jpeg
    5.9 MB · Views: 541
  • CA42FDEE-C594-44ED-B6ED-120224149FF4.jpeg
    CA42FDEE-C594-44ED-B6ED-120224149FF4.jpeg
    3.8 MB · Views: 471
  • 5B12619A-2D16-4F1A-B40D-F32EE4D046B8.jpeg
    5B12619A-2D16-4F1A-B40D-F32EE4D046B8.jpeg
    6.3 MB · Views: 520
  • 8B08D8D3-6B60-4E44-84FD-132201E26616.jpeg
    8B08D8D3-6B60-4E44-84FD-132201E26616.jpeg
    4.9 MB · Views: 484
  • DB23C111-F9D8-4BFF-89A3-04687BE77AE1.jpeg
    DB23C111-F9D8-4BFF-89A3-04687BE77AE1.jpeg
    5 MB · Views: 530
  • 871E7040-DD7C-4E58-BD78-2E1261D6884D.jpeg
    871E7040-DD7C-4E58-BD78-2E1261D6884D.jpeg
    5.1 MB · Views: 566

J Leather Investigater

One Too Many
Messages
1,657
Location
Wilmington n.c.
Ok, moment of truth. The leather: liberty black horsehide, good hand, good weight, feels a bit more like Eastman’s “American walnut Warhorse®” than Aero’s Vicenza. Maybe black Vicenza, certainly thicker than Eastman. The fit: all the measurements were done spot on. I feared it may be too large at the chest but it’s fine. The pattern: this one could use improvement, but I’m in no position to judge as I have not seen the original in person, overall it is a fairly straight up and down pattern, the shoulder seam (seam between front panel and back panel) is situated in the middle of the shoulder on the frontal plane, unlike some pattern that it angles backward and creating a rounded deltoid (which I personally like), if you are not sure of this detail, just observe your jacket hanging on a hanger and see if the seam rests on top of the hanger or falls backward. The details: job well done on the complicated D pocket. It has a lining through the vertical zipper pocket as well as through the hand entry, I need to figure how it’s made! They used a 60s Talon for front zipper (I may be wrong). Back pleates are beautiful. Blacked double D, I can cinched and artificially create a V shaped back. The side belts are raw-edged, instead of folded in half, this is accurate to many originals. Armhole a little low but typical of the era, again, can’t judge. Very happy overall. I would make it differently (pattern wise), but until I do, I wouldn’t say I can do better.
Looks cool
 

Marc mndt

I'll Lock Up
Messages
6,798
Ok, moment of truth. The leather: liberty black horsehide, good hand, good weight, feels a bit more like Eastman’s “American walnut Warhorse®” than Aero’s Vicenza. Maybe black Vicenza, certainly thicker than Eastman. The fit: all the measurements were done spot on. I feared it may be too large at the chest but it’s fine. The pattern: this one could use improvement, but I’m in no position to judge as I have not seen the original in person, overall it is a fairly straight up and down pattern, the shoulder seam (seam between front panel and back panel) is situated in the middle of the shoulder on the frontal plane, unlike some pattern that it angles backward and creating a rounded deltoid (which I personally like), if you are not sure of this detail, just observe your jacket hanging on a hanger and see if the seam rests on top of the hanger or falls backward. The details: job well done on the complicated D pocket. It has a lining through the vertical zipper pocket as well as through the hand entry, I need to figure how it’s made! They used a 60s Talon for front zipper (I may be wrong). Back pleates are beautiful. Blacked double D, I can cinched and artificially create a V shaped back. The side belts are raw-edged, instead of folded in half, this is accurate to many originals. Armhole a little low but typical of the era, again, can’t judge. Very happy overall. I would make it differently (pattern wise), but until I do, I wouldn’t say I can do better.

Is this a repro from their archives offering? I discovered this offering on their website a couple of weeks ago. Really cool and I wondered whether anybody on the lounge had one of these. Looks very well made, only the lining is different from the original? I would love to see some fit pics?

By the way, their pricing is very competitive. Right now they offer a £50 discount on your first order, which would make this a £700 jacket if I'm correct? That's less expensive than a custom aero jacket, while it looks to be better made? (Very neat stitching). Is there a catch?
 

regius

My Mail is Forwarded Here
Messages
3,297
Location
New York
There’s no catch really, the advantage is that the “custom” goes farther than Aero. More detailed sizing, and the design is meant to copy a hit, actual jacket from the lightning magazine. However, as I mentioned, the pattern may not be an accurate copy. A keen eye can tell (pattern recognition so to speak) by looking at how the jacket lays flat, and you can tell the collar and lapel shape and configurations. Lead time may be longer, delivery time certainly very long.
 

Robbie79

Call Me a Cab
Messages
2,122
@regius I had been looking at this specific jacket design in their jacket archives some time ago as I really like it. Congrats from my side! For some reason I didn't dare to chose their Liberty HH after reading several posts here that it feels like vinyl.
 

regius

My Mail is Forwarded Here
Messages
3,297
Location
New York
@Robbie79, I think it’s their old Liberty, I had an Escape A2 from BK when they first launched fit. I was probably the first. It was the same material Eastman uses on the USAAF wallet, same tannery. But this one is very much Vicenza.
 

regius

My Mail is Forwarded Here
Messages
3,297
Location
New York
This horsehide, whether it’s from the same tannery in the Vicenza area as aero’s, its very good, no complaint. It’s exactly where it’s to be at. I like the aero jerky, Vicenza, Eastman warhorse, shinki, horsemen Essex and Lux, all good stuff, but not so much for CXL for garment anymore, it hardens in cold and feels cold to the touch.
 
Messages
10,977
Location
SoCal
Ok, moment of truth. The leather: liberty black horsehide, good hand, good weight, feels a bit more like Eastman’s “American walnut Warhorse®” than Aero’s Vicenza. Maybe black Vicenza, certainly thicker than Eastman. The fit: all the measurements were done spot on. I feared it may be too large at the chest but it’s fine. The pattern: this one could use improvement, but I’m in no position to judge as I have not seen the original in person, overall it is a fairly straight up and down pattern, the shoulder seam (seam between front panel and back panel) is situated in the middle of the shoulder on the frontal plane, unlike some pattern that it angles backward and creating a rounded deltoid (which I personally like), if you are not sure of this detail, just observe your jacket hanging on a hanger and see if the seam rests on top of the hanger or falls backward. The details: job well done on the complicated D pocket. It has a lining through the vertical zipper pocket as well as through the hand entry, I need to figure how it’s made! They used a 60s Talon for front zipper (I may be wrong). Back pleates are beautiful. Blacked double D, I can cinched and artificially create a V shaped back. The side belts are raw-edged, instead of folded in half, this is accurate to many originals. Armhole a little low but typical of the era, again, can’t judge. Very happy overall. I would make it differently (pattern wise), but until I do, I wouldn’t say I can do better.
Congratulations @regius!
It looks very nice. What brand do you think the original was?
 

Forum statistics

Threads
107,025
Messages
3,026,636
Members
52,528
Latest member
Zonko
Top