- Messages
- 11,577
- Location
- Covina, Califonia 91722
NEW & BALKY FOUNTAIN PENS? FORMULA 409 TRICK!
Have you ever had a new fountain pen that just won't write right? You have filled it and it skips or won't write at all. Well the culprit may be grease or oils left over from manufacturing that is interfering with the delivery of ink.
The short lived Stylofiles magazine gave this pointer but again use caution; you may damage a pen if the chemicals attack a part. I believe aluminum is the most susceptible to chemical damage of the metals and both celluloid and casein are easy to damage, so use caution if you've got those as components of your pen lengthy soaking may present a problem. The caveat: Do NOT DAMAGE YOUR PENS! We not responsible for any damages to pens!
VERSION ONE
Take regular Formula 409 and a small glass like a cordial or shot glass. Spray some 409 in the glass and mix with 3 to 4 parts of COLD water. Dip the nib and feed in the mixture then fill and flush the converter or filling system with the mixture for 1 or 2 minutes. Then replace the mixture with plain COLD water and flush for a minute replace water and flush repeat replacing and flushing again and again for a couple more minutes so no trace of the Formula 409 remains. Then fill with new clean ink, the pen should write better if the oil or grease was the culprit. Be sure to empty the pen of all ink first then flush with plain water before using the cleaning mixture. Always use COLD water as warm or hot can damage the feed!
VERSION 2
This is supposed to work on both new and older pens that are presenting a skipping on no flow challenge. Stylus Magazine and some Pen Aficionados contend Formula 409 and Simple Green as too harsh to use on pens. Their alternate flusher and cleaner is a solution you can easily mix up.
Mix 1 Tablespoon of Clear Household Ammonia to 2/3rds cup of Cold Water. Flush with this mixture and then flush thoroughly with PLAIN cold water to remove any residue. (Clear also means NOT sudsy type.)
Happy writing!
Have you ever had a new fountain pen that just won't write right? You have filled it and it skips or won't write at all. Well the culprit may be grease or oils left over from manufacturing that is interfering with the delivery of ink.
The short lived Stylofiles magazine gave this pointer but again use caution; you may damage a pen if the chemicals attack a part. I believe aluminum is the most susceptible to chemical damage of the metals and both celluloid and casein are easy to damage, so use caution if you've got those as components of your pen lengthy soaking may present a problem. The caveat: Do NOT DAMAGE YOUR PENS! We not responsible for any damages to pens!
VERSION ONE
Take regular Formula 409 and a small glass like a cordial or shot glass. Spray some 409 in the glass and mix with 3 to 4 parts of COLD water. Dip the nib and feed in the mixture then fill and flush the converter or filling system with the mixture for 1 or 2 minutes. Then replace the mixture with plain COLD water and flush for a minute replace water and flush repeat replacing and flushing again and again for a couple more minutes so no trace of the Formula 409 remains. Then fill with new clean ink, the pen should write better if the oil or grease was the culprit. Be sure to empty the pen of all ink first then flush with plain water before using the cleaning mixture. Always use COLD water as warm or hot can damage the feed!
VERSION 2
This is supposed to work on both new and older pens that are presenting a skipping on no flow challenge. Stylus Magazine and some Pen Aficionados contend Formula 409 and Simple Green as too harsh to use on pens. Their alternate flusher and cleaner is a solution you can easily mix up.
Mix 1 Tablespoon of Clear Household Ammonia to 2/3rds cup of Cold Water. Flush with this mixture and then flush thoroughly with PLAIN cold water to remove any residue. (Clear also means NOT sudsy type.)
Happy writing!
