Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Open Road/Shaping

Giddyap

New in Town
Messages
8
Is this simply a standard Stetson Open Road?
How is the dent in the front of the crown achieved?
ek.jpg
 

Raybuntu

Familiar Face
Messages
63
Location
Germany
Are you sure the dent in the front is by design? Sometimes hats dent in other spots. There are a few scenes in the 1944 movie "Laura" the main characters hat dents in the back weirdly.

But if you want it by design a bit of steam will help. Hold the hat with both hands in the side dents. Then steam the front carefully. Use both of your thumbs to crease the dent from center to the sides. At least that's how I would do it.
 
Last edited:
Messages
18,915
Location
Central California
Is this simply a standard Stetson Open Road?
How is the dent in the front of the crown achieved? View attachment 326730


The dent in the front of the crown is called a “mule kick” and it’s easy to pinch in and then steam to set.

The hat does not look like an open road to me. The brim looks too wide and the brim edge looks to be raw rather than bound. Could be one of dozens of models from almost as many makers.
 
Messages
17,535
Is this simply a standard Stetson Open Road?
How is the dent in the front of the crown achieved? View attachment 326730
It's a Rancher crease with a Mule kick in front. Bigger than an OR, a Rancher crease is usually seen on Brims 3" & wider. Center dent is wider & more squared up than an OR crease. I use a length of 3/8 - 1/2" dowl rod to level & press in the Mule kick.

IMG_2383.jpg
 
Messages
17,535
And that, my friends, is the secret to successful project management,
And being able to think on your feet.

We both know that CE's can range from being nothing more than glorified salesmen to doing pretty good for themselves, depending on their field. After graduation the guys I knew to get "financially comfortable" the quickest were petroleum engineers. It was probably just the times.
 

jlee562

I'll Lock Up
Messages
5,047
Location
San Francisco, CA
Just to be clear...
If I buy this hat, I can have it shaped to identically match the original pic? - https://www.ebay.com/itm/Stetson-Ra...878939?hash=item2389ed329b:g:1FkAAOSwJVxZd41m

you should more or less be able to get that look. The modern hats with pressed in creases are not the most shapeable, but I'd imagine most western hat shops have done such a shaping. This hat likely has a wider brim than the original pic.

In this pic, am I looking at the front or the back of the hat?

On men's hats, the bow is traditionally placed on the left side (when being worn that is). You're looking at the front. Notice the difference between the shape of the "trough" formed by the center crease.
 

Rmccamey

I'll Lock Up
Messages
5,614
Location
Central Texas
Good advice here but, as we have had this discussion with another member recently, it's worth repeating. Any hat shop, and many western wear stores, should be able to shape a hat to get very close to your examples. I caution, however, not to get hung up on having "an exact replica". Get the hat you want but understand that every hat and every felt is going to have it's own character. If the mule kick is a little deeper or a little shallow, or of the side brim is a little higher or lower, it will still look great. It's your hat so put some of your personality into it and don't get hung up on some strict definition of "an identical hat".

I have a more subtle mule kick in my Beaver Brand hat.
20210319_160125.jpg

Just to be clear...
If I buy this hat, I can have it shaped to identically match the original pic? - https://www.ebay.com/itm/Stetson-Ra...878939?hash=item2389ed329b:g:1FkAAOSwJVxZd41m
 
Messages
17,535
Just to be clear...
If I buy this hat, I can have it shaped to identically match the original pic? - https://www.ebay.com/itm/Stetson-Ra...878939?hash=item2389ed329b:g:1FkAAOSwJVxZd41m
The 6X has a 4" brim whereas the hat you are wanting to clone is in the range of 3-1/4 - 3-1/2", so the ratio of brim & crown will look different together. As Jared pointed out the 6X with factory pressed crease can be as hard with stiffener as a helmet.

On a man's hat ribbon tails & bows are always worn on the left side. Sometimes you will see pics here that appear the opposite but that is a reverse image from a particular camera phone & the way it was shot. Mule kicks are always in the crown front, sometimes a second smaller kick can be added to the crown rear.

If you are not going to be doing the crease yourself I would think you will find a local Western wear store with hat shop more patient & cooperative with you if you buy the hat from them rather than take in a new hat from eBay. Box stores like Cavenders Boot City or Sheplers will probably be of little help.

If you decide to do the crease yourself I would look for a clean 1970's - 1980's 4X with a brim of 3-1/4" for $50 & give it a go. Good luck with whatever you decide.
 
Messages
19,096
Location
Funkytown, USA
The 6X has a 4" brim whereas the hat you are wanting to clone is in the range of 3-1/4 - 3-1/2", so the ratio of brim & crown will look different together. As Jared pointed out the 6X with factory pressed crease can be as hard with stiffener as a helmet.

On a man's hat ribbon tails & bows are always worn on the left side. Sometimes you will see pics here that appear the opposite but that is a reverse image from a particular camera phone & the way it was shot. Mule kicks are always in the crown front, sometimes a second smaller kick can be added to the crown rear.

If you are not going to be doing the crease yourself I would think you will find a local Western wear store with hat shop more patient & cooperative with you if you buy the hat from them rather than take in a new hat from eBay. Box stores like Cavenders Boot City or Sheplers will probably be of little help.

If you decide to do the crease yourself I would look for a clean 1970's - 1980's 4X with a brim of 3-1/4" for $50 & give it a go. Good luck with whatever you decide.

I mentioned in another thread awhile back about revisiting some of the old Western TV series. I've been surprised at the occasional display of bows on the wrong side of mens' hats on some shows. I recently watched an episode of Wagon Train with Jack Lord in it. For one part of the show, his ribbon was on the wrong side. After a commercial break, it was on the right side. Nobdoy else's changed, so it wasn't a reverse image.
 
Messages
11,130
Location
Alabama
I mentioned in another thread awhile back about revisiting some of the old Western TV series. I've been surprised at the occasional display of bows on the wrong side of mens' hats on some shows. I recently watched an episode of Wagon Train with Jack Lord in it. For one part of the show, his ribbon was on the wrong side. After a commercial break, it was on the right side. Nobdoy else's changed, so it wasn't a reverse image.

I’ve seen that as well, Jim. I’ve wondered if they just put the hat on backwards.
 

Forum statistics

Threads
107,027
Messages
3,026,662
Members
52,533
Latest member
RacerJ
Top