Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Engineer Boots, Harness Boots...

Edward

Edward

Bartender
Messages
24,789
Location
London, UK
Do Wescos do them without the label stitched on the front? (Not that big a deal, given I wear my boots under my jeans these days.... In my drainpipe days, the bootswent up and over, now my jeans are generally too wide to do that even i I wanted to.... but curious).

I have my eye on some Wescos eventually, but then I'm also very, very tempted by the Lewis Leathers Mechanic Boot A10:

MechB-A10-1_2.png
 
D

deaner33

New in Town
Messages
32
Location
Jackson, Mississippi
Edward said:
Do Wescos do them without the label stitched on the front? (Not that big a deal, given I wear my boots under my jeans these days.... In my drainpipe days, the bootswent up and over, now my jeans are generally too wide to do that even i I wanted to.... but curious).

I have my eye on some Wescos eventually, but then I'm also very, very tempted by the Lewis Leathers Mechanic Boot A10:

MechB-A10-1_2.png
Click to expand...

The label stitched on the outside is a limited edition thing.


Sent from my iPhone using Tapatalk Pro
 
Colin G

Colin G

One Too Many
Messages
1,194
Location
Canada
Edward, Wescos will be a stamped logo and you can't omit it either.

I dig those Lewis leathers boots. I have looked at their motorcycle boots for years but never pulled the trigger since the exchange rate is so poor.
 
Edward

Edward

Bartender
Messages
24,789
Location
London, UK
Colin G said:
Edward, Wescos will be a stamped logo and you can't omit it either.
Click to expand...

Much subtler than the label, though. ut yeah, it would be preferable to have neither. What I like about the Lewis logos is that a little nail varnish removed will soon sort them if desired.

I dig those Lewis leathers boots. I have looked at their motorcycle boots for years but never pulled the trigger since the exchange rate is so poor.
Click to expand...

Is the Canadian dollar down that much? I'd assumed the pound would be as historically weak against that as it is the USD and the Chinese RMB these days...
 
Edward

Edward

Bartender
Messages
24,789
Location
London, UK
SimonR said:
Be interested if you go for the Lewis boots as I've heard rightly or wrongly that the shaft is very narrow
Click to expand...

Not yet tried them on, though I have seen them in person. They're a touch narrower than the average, though they don't look ridiculously narrow. Not close to as snug as the zip-back boots.
 
Dm101

Dm101

A-List Customer
Messages
496
Location
Maryland
regius said:
Low rise heel? These are pretty darn high 2”. They are the 100th Anniversary edition Wesco with CXL Horsehide


Sent from my iPhone using Tapatalk
Click to expand...

Hmmm...for some reason my eyes stopped at the reddish portion of the sole.
Indeed they are tall...
 
Edward

Edward

Bartender
Messages
24,789
Location
London, UK
Those are interesting. I normally hate side- zips on engineers, but these are chunky enough to make them work, plus, crucially, the strap goes around the zip rather than being rendered irrelevant by it. Can see those being nice for air travel....
 
D

deaner33

New in Town
Messages
32
Location
Jackson, Mississippi
Edward said:
Those are interesting. I normally hate side- zips on engineers, but these are chunky enough to make them work, plus, crucially, the strap goes around the zip rather than being rendered irrelevant by it. Can see those being nice for air travel....
Click to expand...

Yeah, not a fan of zips on engineers, but if Brian does them I guess they’re ok?[emoji848]


Sent from my iPhone using Tapatalk Pro
 
Bfd70

Bfd70

I'll Lock Up
Messages
4,049
Location
Traverse city
My thought of the function was that perhaps the shaft could be made narrower than is normally possible. I have the calves of a skinny 11 year old. I’d like the boot shaft extra narrow. There is something about that pair (maybe just the zipper) that makes them look like propper moto boots
 
Edward

Edward

Bartender
Messages
24,789
Location
London, UK
deaner33 said:
Yeah, not a fan of zips on engineers, but if Brian does them I guess they’re ok?[emoji848]


Sent from my iPhone using Tapatalk Pro
Click to expand...

Nope.... I'm not in the market for thatg sort of expense on a pair of boots,. so the maker isirrelevant to me. What I dislike intensely is this sort of thing:

41eRBzaC4IL.jpg


Note the zip looks light and flimsy, and it's toned in to try and hide it. Also the straps start to the right of the boot, so they have no effect around the zip. The whole effect to me just lookscheap and nasty. The boots in the previous post I commented on are the first time I've seen a zip in a traditional engineer boot thatdoesn't look bad, or like acheap compromise to the design in favour of convenience (one of the things I hate most in the world, aesthetically speaking, are lace-up boots that also have a side-zip. Total deal breaker to me.). Ultimately, when it comes to engineer boots I still preferf the traditional design, and with zip-up boots I much prefer the Brit style a la Lewis/Aviakit or Gold Top, a neater-fitting boot with the zip running the length of the back end rather than on the side, but these surprised me by being thefirst engineer boot with aside-zip where I actually liked the look of it. Largely academic as I'll never spend that much on a pair of boots (and certainly wouldn't custome order shoes by post with no way to try them on first), but it's been in my mind recently as I've hit travelseason with work, and long-haul flights cetainly make easy on-off footwear a bonus, given the extremities of airport security these days. (At least at the UK end - I don't think I've ever been asked to remove my shoes in Beijing.)
 
Dm101

Dm101

A-List Customer
Messages
496
Location
Maryland
Bfd70 said:
My thought of the function was that perhaps the shaft could be made narrower than is normally possible. I have the calves of a skinny 11 year old. I’d like the boot shaft extra narrow. There is something about that pair (maybe just the zipper) that makes them look like propper moto boots
Click to expand...

YES!!
That is the exact reason I'd buy those boots.
The Ariat boots that I wear now are comfortable, but the shaft is so big I look like Puss-in-boots if and when I pull up my pants leg. They have no upper buckle and no side zip...just pure shaft.
Meanwhile, my CK boots with side-zip are just the same size as my shin and fit like a glove. The toebox is a bit narrow as they're pointy boots though, have to get that remedied this summer and let the cobbler expand their mind...lol.
Then they'll be perfect.
 
Edward

Edward

Bartender
Messages
24,789
Location
London, UK
Bfd70 said:
My thought of the function was that perhaps the shaft could be made narrower than is normally possible. I have the calves of a skinny 11 year old. I’d like the boot shaft extra narrow. There is something about that pair (maybe just the zipper) that makes them look like propper moto boots
Click to expand...

I think it is partially aesthetic for med too, tbh. I like that they incorporate the zip into the design, rather than trying to hide it. (The most inexplicable thing to me are those women's fashion boots I haveseen in recent years that have a big, showy, *fake* zip on the outside....... and a real, flimsy and same-colour, designed to tone in actual zip on the inside.)

Thinking about it, what Brian - Role Club? - 's boots do well is that they actually incorporate the zip into the design so that it's a part of the boot, rather than trying to hide it as if it's not there.

Dm101 said:
YES!!
That is the exact reason I'd buy those boots.
The Ariat boots that I wear now are comfortable, but the shaft is so big I look like Puss-in-boots if and when I pull up my pants leg. They have no upper buckle and no side zip...just pure shaft.
Meanwhile, my CK boots with side-zip are just the same size as my shin and fit like a glove. The toebox is a bit narrow as they're pointy boots though, have to get that remedied this summer and let the cobbler expand their mind...lol.
Then they'll be perfect.
Click to expand...

Undoubtedly you can create a better fitting boot if it opens to let your foot in and then does up, with a zip, buckles, velcro, laces, or whatever. I think the trick with a nice-looking engineer boot is getting the shaft just right, so that it's easy on/off, without looking comically wide. That has its challenges - though equally, the grading on a boot like a Lewis Westway is equally tricky, given that you don't want it to end up too tight with the zip.
 
You must log in or register to reply here.

Similar threads

L
Quality of Saint Laurent Wyatt Harness boots?
Replies
8
Views
5K
Pio
Pio
RedWolf
Harness Boots
Replies
3
Views
2K
RedWolf
RedWolf
L
How difficult is it to polish Lucchese Black Cherry colored boots?
Replies
5
Views
4K
belfastboy
belfastboy
TartuWolf
Sendra Boots - Brand overview and review of 5 different models
Replies
8
Views
7K
TartuWolf
TartuWolf
Monitor
Boots ID, please!
Replies
8
Views
3K
Edward
Edward

Members online

Total: 5,796 (members: 50, guests: 5,746)

Forum statistics

Threads
107,274
Messages
3,032,798
Members
52,737
Latest member
Truthhurts21
Top