Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Phoenix Hat Company

humanshoes

One Too Many
Messages
1,428
Location
Tennessee
The trial run of the Randal Alan 3D printed hat block is complete. To be honest, I was fully prepared for the block to fail, and even thought it might, however, the finish held up nicely and the hat body released easily from the block. I figured the block itself or at least the finish would probably just melt and stick to the hat body. I'm happy to say that didn't happen. I applied the maximum amount of heat, steam, and pressure and even spent some time ironing directly on the block with only a thin pressing cloth between the block and my commercial steam iron with no ill effect to the block. After all that abuse, I did notice a bit of discoloration at the top of block, but that was not due to finish breakdown or loss and I don't believe it's anything that will effect the block's performance in any way.
In summation, I believe that Randal's blocks will be a great alternative to heavier, pricier wood blocks. Of course, at this point, I can't speak to long term durability. I will say that, so far, I can see no reason why these blocks won't provide years of good service. As a craftsman I believe there is no such thing as too many tools in the toolbox and I'm excited that there is yet another one available to hatters. As a bonus, there seems to be no limit to the styles he can create.
Disclaimer: Even though Randal was kind enough to send me a free demo block, I have no personal stake in the success or failure of his enterprise and have neither requested nor received any future special considerations.
IMG_1575.JPG
IMG_1571.JPG
IMG_1569.JPG
 

T Jones

I'll Lock Up
Messages
6,600
Location
Central Ohio
The trial run of the Randal Alan 3D printed hat block is complete. To be honest, I was fully prepared for the block to fail, and even thought it might, however, the finish held up nicely and the hat body released easily from the block. I figured the block itself or at least the finish would probably just melt and stick to the hat body. I'm happy to say that didn't happen. I applied the maximum amount of heat, steam, and pressure and even spent some time ironing directly on the block with only a thin pressing cloth between the block and my commercial steam iron with no ill effect to the block. After all that abuse, I did notice a bit of discoloration at the top of block, but that was not due to finish breakdown or loss and I don't believe it's anything that will effect the block's performance in any way.
In summation, I believe that Randal's blocks will be a great alternative to heavier, pricier wood blocks. Of course, at this point, I can't speak to long term durability. I will say that, so far, I can see no reason why these blocks won't provide years of good service. As a craftsman I believe there is no such thing as too many tools in the toolbox and I'm excited that there is yet another one available to hatters. As a bonus, there seems to be no limit to the styles he can create.
Disclaimer: Even though Randal was kind enough to send me a free demo block, I have no personal stake in the success or failure of his enterprise and have neither requested nor received any future special considerations.
View attachment 203714 View attachment 203715 View attachment 203716
Excellent!
 

T Jones

I'll Lock Up
Messages
6,600
Location
Central Ohio
Beautiful result! I appreciate you taking the time to test my 3d printed block. I love the hat you made.


Sent from my iPhone using Tapatalk
I think you may be replying to Rick. I haven't had the pleasure of using one of your blocks yet. I'm the one who just contacted you recently on Etsy and sent you pictures and measurements of a block that I wanted you to make for me. I'm definitely looking forward to it.
 

Rmccamey

I'll Lock Up
Messages
5,614
Location
Central Texas
Always good to have more tools!

The trial run of the Randal Alan 3D printed hat block is complete. To be honest, I was fully prepared for the block to fail, and even thought it might, however, the finish held up nicely and the hat body released easily from the block. I figured the block itself or at least the finish would probably just melt and stick to the hat body. I'm happy to say that didn't happen. I applied the maximum amount of heat, steam, and pressure and even spent some time ironing directly on the block with only a thin pressing cloth between the block and my commercial steam iron with no ill effect to the block. After all that abuse, I did notice a bit of discoloration at the top of block, but that was not due to finish breakdown or loss and I don't believe it's anything that will effect the block's performance in any way.
In summation, I believe that Randal's blocks will be a great alternative to heavier, pricier wood blocks. Of course, at this point, I can't speak to long term durability. I will say that, so far, I can see no reason why these blocks won't provide years of good service. As a craftsman I believe there is no such thing as too many tools in the toolbox and I'm excited that there is yet another one available to hatters. As a bonus, there seems to be no limit to the styles he can create.
Disclaimer: Even though Randal was kind enough to send me a free demo block, I have no personal stake in the success or failure of his enterprise and have neither requested nor received any future special considerations.
View attachment 203714 View attachment 203715 View attachment 203716
 

humanshoes

One Too Many
Messages
1,428
Location
Tennessee
The elusive Maillard Straw Hat Brim Press now has a new home in the Phoenix Hat Company workshop. I believe these were designed just to flatten brims on boater/skimmer type straw hats, but, with the use of pressing cloths to eliminate segment marks, I don't plan to limit it's use to straws. It's built like a tank, weighs in at nearly 40 pounds, and was clearly made to give many lifetimes of service. It's likely 100+ years old so I'd say it's lived up to it's end of the bargain and it's not done yet. I'm very happy and grateful to be able to give this rare and beautiful old press a new and useful life in my little hat shop.
IMG_1590.JPG
IMG_1593.JPG
IMG_1594.JPG
IMG_1589.JPG
 

Courier Six

New in Town
Messages
21
That Pecan looks really nice.
How tall is that one along with brim width?

After asking for advice in another thread and talking with Rick I'm going to have my own western weight beaver in chocolate to be my first "real hat" to hold onto for a long time.
Seeing photos like this definitely adds to the anticipation.
 

Forum statistics

Threads
107,031
Messages
3,026,753
Members
52,533
Latest member
RacerJ
Top