Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Show us your Pipes

Messages
17,587
Ace of Spades. Not just a Motörhead song. Also one of Comoy's lesser known brands made in France. I wasn't able to find out much more than that online. The closest I could come to a date was from one (with a different shape, but otherwise the same markiings) on a Comoy's pipe company history page. It said "Early French". Not much help.

View attachment 524221 View attachment 524222 View attachment 524223 View attachment 524224 View attachment 524225 View attachment 524226 View attachment 524227 View attachment 524228


The stem is vulcanite, and the pipe weighs only 21.5 grams. In great shape, unsmoked and almost like new. I just had to clean some oxidation off of the stem. I plan on breaking it in Sunday with a birthday bowl.
I always liked a Cutty with a heel. Reminds me of the old clay tavern pipes.
 
Messages
17,587
I was considering buying one of those clay pipes recently. I decided against it because I knew I'd drop and break it before I could get more than a couple of uses out of it.
They tend to smoke hot & if you don’t fit it with a softie bit or something the stem where it goes into your mouth tends to break down & turn chalky from saliva.
 
Messages
12,474
Location
Germany
A different question.

Has anoyne of you tried Meerschaum filters??
I read some negative comments on the net, that the granulate often clogs the filter openings.

Actually, I don't use filters, but maybe I could try these Meerschaum ones.
 
Messages
17,587
Another Cavalier dating to the late 19th century, in a private collection.

IMG_2626.jpeg
 
Messages
12,474
Location
Germany
No sooner said than done! Hopped to the next bigger city and got some boxes. White Elephant "Super Flow", with 15% less Meerschaum granulate than usual.
I already tried the first one of them in my Savineli Etna 320 and indeed, they work well! I'm surprised.

These ones seem to work much better than the Vauen Dr. Perl Active Carbon filters, which I tried a couple of times, but never liked, because too much taste got killed.

But these ones don't have significant more drawing resistance AND they don't kill the taste.
Tried it with MacBaren Mixture Scotish Blend.

Not bad, for the first try, but I will report on further tests! :)
 

Attachments

  • IMGP9308.JPG
    IMGP9308.JPG
    105.2 KB · Views: 44
  • IMGP9309.JPG
    IMGP9309.JPG
    102.6 KB · Views: 40
Messages
12,474
Location
Germany
Last one and an half hour, I did a parallel test with the Meerschaum filters. And they absolutely work well, I tell you!

BUT:
I did a comparison test, meaning filling one of my top-smokers, the Vauen Duett 1509 with not so good (burning) tobacco and filling my smallest Jean Claude, which is not a really good smoker, with good tobacco.

The result was, that the small Jean Claude half-bent didn't work well with the Meerschaum filter, because the pipe itself is surely not that well engineered/balanced, what makes using the filter resulting in an even worse smoking. I was just unable to keep the pipe going.

On the Vauen Duett 1509, I had no significant difference.

But I'm looking forward to test with my other five pipes. And I will report to you! :p
 
Messages
12,474
Location
Germany
The Vauen Duett 1500.

Works well with my Meerschaum filters.
But not a pipe for beginners, I would say. You have to pay more attention and smoke slowly, otherwise it's getting hot fast.
 

Attachments

  • IMGP9322.JPG
    IMGP9322.JPG
    163.1 KB · Views: 36
Messages
12,474
Location
Germany
Design Berlin Magnum 67

Design Berlin (Hartmann) is liquidated, but leftovers can be found here and there.

And this one is original thuringian Schweina (Bad Liebenstein) production, which finally stopped in 2017, after 177 years!!

But all I can say, is, that this XXL volume pipe is an absolutely top-smoker!

And it gave me 1 hour and 50 minutes. JEEESUS!! :p
 

Attachments

  • IMGP9336.JPG
    IMGP9336.JPG
    207.3 KB · Views: 34
  • IMGP9332.JPG
    IMGP9332.JPG
    176.3 KB · Views: 32
  • IMGP9331.JPG
    IMGP9331.JPG
    203.8 KB · Views: 35
  • IMGP9329.JPG
    IMGP9329.JPG
    191.2 KB · Views: 31
  • IMGP9326.JPG
    IMGP9326.JPG
    264.8 KB · Views: 31
Messages
12,474
Location
Germany
I actually got some new pipes. And the excellent working ones are already crystalizing.

So here's my actual top-smoker list. No wonder, that flatter pot-shaped pipes are working excellent:

-Vauen Duett 1509
-
Savinelli Etna 320
-Design Berlin Magnum 67

So now, I can definitely recommend Savinelli's 320 shape! This Diplomat shape is very handy and it smokes like hell, I tell you! The drill is 23 mm (0,9 inch)!!

The Vauen 1509 is the very basic "potty" and it performs totally uncomplicated , too. Drill is 22 mm (0,87 inch). It's Vauen's "09" shape

Design Berlin is sadly liquidated company. The Magnum 67 has drill 22 mm (0,9 inch).
 

moehawk

I'll Lock Up
Messages
5,670
Location
Northern California
Over the last few months I have bought some unfinished stummels and rough molded vulcanite stems from a couple of ebay sellers. They were all flawed in some way or another, with pits and cracks that kept them from being made into pipes 50 years ago. Lots of fun and learning working around or through these issues, not to mention exercising my problem-solving skills. I failed several times, ruining a number of stummels, but persevered until I got something usable. The apple I posted recently was one of the first that came out decent.
A couple of weeks ago I bought a lot of 12 random stummels and one semi finished pipe kit from another ebayer, who bought over 6000 pieces in a lot from the old Comoy's/GBD/BBB factory in England. Here are a few I have finished from this last bunch.

20230626_201412.jpg 20230626_203438.jpg 20230626_201522.jpg 20230626_201552.jpg 20230626_203014.jpg 20230626_203037.jpg 20230626_203051.jpg 20230626_203123.jpg 20230626_203148.jpg 20230626_203219.jpg


The apple was the semi finished one. The others were pre drilled, but still pretty rough.
I think I might have to buy a bigger pipe rack...
 

Forum statistics

Threads
107,274
Messages
3,032,812
Members
52,737
Latest member
Truthhurts21
Top