Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Daniele Tanto

I'll Lock Up
Messages
4,090
Location
Verona - Italia
I think this will be, for now, the last batch of the small sizes. A few more will appear in the next days
Barbisio Vinaccia 1.JPG

Barbisio presumed size 55 cm or 6 7/8 US. No paper label present or other indication
Barbisio Vinaccia 2.JPG
The color of the felt, very beautiful, is a quite dark burgundy, very bold
Barbisio Vinaccia 3.JPG

The hat is unlined and very basic, I have one of the same type in blue, size 61 cm. very interesting to wear on humid days
Barbisio Vinaccia interno totale.JPG

This has a smaller aspect ratio
Barbisio Vinaccia 4.JPG
The raw brims are 5.5 cm, the crown open at its maximum height is 13 cm and the ribbon is 1.5 cm. high in the same color felt.
Barbisio Vinaccia impermeabile.JPG
Barbisio Vinaccia negoziante.JPG
Barbisio Vinaccia marchio.JPG
A hat produced in the Seventies at the end of the glorious history of Barbisio di Sagliano Micca - Biella.
Barbisio Vinaccia 5.JPG

An example of Italian hats production towards sunset
 
Last edited:

Daniele Tanto

I'll Lock Up
Messages
4,090
Location
Verona - Italia
Panizza Verde 1.jpg

His older brother has already proved his qualities: bold in color and perfect in his livery.
Barbisio Verde 54 interno totale.jpg

Barbisio size 55 cm or 6 7/8 US.
Panizza Verde 2.jpg

These are the measurements: the raw brims are at 6.5 centimeters and the crown at its lowest point is at 11 centimeters.
Panizza Verde 3.jpg

It is a minor clone of a magnificent hat.
Barbisio Verde 54 interno parziale.jpg
I hope there is someone who can wear it, despite the size now "out of fashion".
 

Daniele Tanto

I'll Lock Up
Messages
4,090
Location
Verona - Italia
Also for this Borsalino I had a blow to the heart when it emerged from the box coming from Mantova and also for it the disappointment was great
Pomice Borsalino 1.jpg

It has the same age as the brother shown yesterday and the same great features, but alas the same size.
Pomice Borsalino 3.jpg

Borsalino Qualità Extra Superiore size 3 1/2 or 54 centimeters a 6 3/4 in US.
Pomice Borsalino 5.jpg

The felt color is "Pomice" and the hat type is "Debrosan"
Pomice Borsalino interno totale.jpg

It is more elgant then the "Misto Volga" and excellently made, also this is about ninety years old because it has the same components as some Borsalinos sold in Eastern Europe and in Germany before the Second World War
Pomice Borsalino interno parziale.jpg
The oil skin protection has broken during the long time it was in a small hats shop near Mantova
Pomice Borsalino 6.jpg

The measurements are as follows: the brim with a minimal edged ribbon is 6.5cm, the ribbon is 3cm high, the highest point of the open crown is 13 centimeters
Pomice Borsalino 4.jpg

As I publish these very small hats I hope there is someone who can wear them, perhaps with some small adjustments, but leaving them in a box would be a very serious sin.
 
Messages
18,886
Location
Central California
View attachment 365237 View attachment 365238 A very cool “Stetson Statler 1/8” just been given to me, here in Australia, is it vintage? Came with the brown packaging inside ican’t find any info on this model.Thanks


If it’s a US made hat it looks to be 1950s. If it was made in somewhere else under license from Stetson then it’s still probably from the 1950s but there is less certainty on my part. Nice hat in any case. It’s a size 7 1/8 (don’t ask me why Stetson only used the fraction on the size tags).
 
Messages
18,886
Location
Central California
Thank you. I believe it was a USA purchase, made decades ago, so that fits with the age. Have never heard of Stetsons being made here. I will probably list it on ebay au once I check out what price to ask. Much appreciated, cheers


Akubra had the license to make hats in Australia for many years.

Your photos don’t show a whole lot, but the proportions, style, and the smallish size (7 1/8) mean it probably won’t sell for much. If it fits why not keep it and wear it?
 

Mr Oldschool

One of the Regulars
Messages
108
Location
Southern Oregon
I'm in a local stage show where I get to feature two of my vintage hats. First is my Stetson Sovereign, which has been my main lid for years, but at the end of the show, from seemingly nowhere, I produce this beauty of a Young's opera topper which I just picked up. Overall it's in very nice condition, but the edge binding almost immediately started falling off. I called Vintage Sillhouettes and chatted with David for a bit. Suffice it to say, I will have to repair the binding myself if it's going to happen prior to show opening (which I expected to be the case). David gave good advice on how to make it less obvious from "10 feet away" which I have already followed. I'm just a little concerned about further damage occurring just from handling it. Anyway, here it is...
20210924_164009.jpg
20210924_164012.jpg
20210924_163946.jpg
20210924_163953.jpg
20210924_164017.jpg
 

TheOldFashioned

Call Me a Cab
Messages
2,034
Location
The Great Lakes
Also for this Borsalino I had a blow to the heart when it emerged from the box coming from Mantova and also for it the disappointment was great
View attachment 365093
It has the same age as the brother shown yesterday and the same great features, but alas the same size.
View attachment 365095
Borsalino Qualità Extra Superiore size 3 1/2 or 54 centimeters a 6 3/4 in US.
View attachment 365096
The felt color is "Pomice" and the hat type is "Debrosan"
View attachment 365097
It is more elgant then the "Misto Volga" and excellently made, also this is about ninety years old because it has the same components as some Borsalinos sold in Eastern Europe and in Germany before the Second World War
View attachment 365098
The oil skin protection has broken during the long time it was in a small hats shop near Mantova
View attachment 365099
The measurements are as follows: the brim with a minimal edged ribbon is 6.5cm, the ribbon is 3cm high, the highest point of the open crown is 13 centimeters
View attachment 365100
As I publish these very small hats I hope there is someone who can wear them, perhaps with some small adjustments, but leaving them in a box would be a very serious sin.

What an amazing treasure trove of hats, Daniele! The Punti 3-1/2s would still be a touch too large for my boy but I guess he could always grow into them. ;)
 

TheOldFashioned

Call Me a Cab
Messages
2,034
Location
The Great Lakes
Pretty sure this one has become my oldest felt hat, a non-western Stetson No. 1 Quality:
20210930_161253.jpg


20210930_161353.jpg


20210930_161422.jpg


20210930_161556.jpg


20210930_161908.jpg


1633035716164.jpg


1633035876299.jpg


Specs:
5-3/8" Crown
2-3/4" Brim
3/8" Overwelt
2" Ribbon
116g Weight
LOT 2534​

Beautiful light grey heathered felt with a medium to long hair finish. There are several moth nibbles throughout but due to the finish they're indistinguishable unless looking up close. The double frayed bow is what immediately cued me to this likely being an old piece. The flipped orientation of the No. 1 crest also seems to be less common. I know @alanfgag and @jlee562 have hats with a crest oriented this way.

Because of these features I broke one of my rules in regards to buying because no size was shown. The only dimension listed by the seller was the inner circumference, measuring "about 23 inches." I personally don't trust this dimension but I went ahead and BIN'd anyway. Very relieved when I took it out of the box and it fit my head, later finding the 7-3/8 tag behind the sweat.

The sweat is still quite supple, though obviously some stitches are missing. I was quite careful locating the LOT number in front, first utilizing a mirror to verify it was there and legible. At 2534 it's one of the relatively lower numbers, and lower than my Stetson derby (6614).

As an added bonus I've tried doing some research on the perforated name CJ Byrns, and the most common hits tie to a lumber baron from Michigan's Upper Peninsula. Amongst other things he served as the General Manager at Birds Eye Veneer in Escanaba in the 1920s, which is the city where I grew up. I realize this is a bit speculative on my part but it would just about be the proverbial feather in the cap if this hat truly did once belong to him. I've contacted the local historical society for a couple records they have on file associated with Byrns. I'd also like to check census records to see if any others with the same name are documented. The pieces so far, though, seem to fit. His position warranted him spending time in Chicago for business, and a description of his preserved home mentions the bathroom being remodeled after a recent stay at a hotel in Chicago. So buying a hat at Marshall Field & Co of Chicago seems plausible.

Even if the Byrns connection is too much of a leap, this hat is still and oldie and a goodie. Still undecided on how to shape but I'll be looking through the pre-40s thread and old fashion plates and advertisements for inspiration.
 
Last edited:

RossRYoung

Practically Family
Messages
900
Pretty sure this one has become my oldest felt hat, a non-western Stetson No. 1 Quality:

Specs:
5-3/8" Crown
2-3/4" Brim
3/8" Overwelt
2" Ribbon
116g Weight
LOT 2534​

Beautiful light grey heathered felt with a medium to long hair finish. There are several moth nibbles throughout but due to the finish they're indistinguishable unless looking up close. The double frayed bow is what immediately cued me to this likely being an old piece. The flipped orientation of the No. 1 crest also seems to be less common. I know @alanfgag and @jlee562 have hats with a crest oriented this way.

Because of these features I broke one of my rules in regards to buying because no size was shown. The only dimension listed by the seller was the inner circumference, measuring "about 23 inches." I personally don't trust this dimension but I went ahead and BIN'd anyway. Very relieved when I took it out of the box and it fit my head, later finding the 7-3/8 tag behind the sweat.

The sweat is still quite supple, though obviously some stitches are missing. I was quite careful locating the LOT number in front, first utilizing a mirror to verify it was there and legible. At 2534 it's one of the relatively lower numbers, and lower than my Stetson derby (6614).

As an added bonus I've tried doing some research on the perforated name CJ Byrns, and the most common hits tie to a lumber baron from Michigan's Upper Peninsula. Amongst other things he served as the General Manager at Birds Eye Veneer in Escanaba in the 1920s, which is the city where I grew up. I realize this is a bit speculative on my part but it would just about be the proverbial feather in the cap if this hat truly did once belong to him. I've contacted the local historical society for a couple records they have on file associated with Byrns. I'd also like to check census records to see if any others with the same name are documented. The pieces so far, though, seem to fit. His position warranted him spending time in Chicago for business, and a description of his preserved home mentions the bathroom being remodeled after a recent stay at a hotel in Chicago. So buying a hat at Marshall Field & Co of Chicago seems plausible.

Even if the Byrns connection is too much of a leap, this hat is still and oldie and a goodie. Still undecided on how to shape but I'll be looking through the pre-40s thread and old fashion plates and advertisements for inspiration.

So nice, love the heather felt. I’m Detroit area native myself, but love da Yooper reference! Thanks for sharing and great snag.
 
Messages
10,774
Pretty sure this one has become my oldest felt hat, a non-western Stetson No. 1 Quality:
View attachment 365468

View attachment 365469

View attachment 365470

View attachment 365471

View attachment 365472

View attachment 365473

View attachment 365474

Specs:
5-3/8" Crown
2-3/4" Brim
3/8" Overwelt
2" Ribbon
116g Weight
LOT 2534​

Beautiful light grey heathered felt with a medium to long hair finish. There are several moth nibbles throughout but due to the finish they're indistinguishable unless looking up close. The double frayed bow is what immediately cued me to this likely being an old piece. The flipped orientation of the No. 1 crest also seems to be less common. I know @alanfgag and @jlee562 have hats with a crest oriented this way.

Because of these features I broke one of my rules in regards to buying because no size was shown. The only dimension listed by the seller was the inner circumference, measuring "about 23 inches." I personally don't trust this dimension but I went ahead and BIN'd anyway. Very relieved when I took it out of the box and it fit my head, later finding the 7-3/8 tag behind the sweat.

The sweat is still quite supple, though obviously some stitches are missing. I was quite careful locating the LOT number in front, first utilizing a mirror to verify it was there and legible. At 2534 it's one of the relatively lower numbers, and lower than my Stetson derby (6614).

As an added bonus I've tried doing some research on the perforated name CJ Byrns, and the most common hits tie to a lumber baron from Michigan's Upper Peninsula. Amongst other things he served as the General Manager at Birds Eye Veneer in Escanaba in the 1920s, which is the city where I grew up. I realize this is a bit speculative on my part but it would just about be the proverbial feather in the cap if this hat truly did once belong to him. I've contacted the local historical society for a couple records they have on file associated with Byrns. I'd also like to check census records to see if any others with the same name are documented. The pieces so far, though, seem to fit. His position warranted him spending time in Chicago for business, and a description of his preserved home mentions the bathroom being remodeled after a recent stay at a hotel in Chicago. So buying a hat at Marshall Field & Co of Chicago seems plausible.

Even if the Byrns connection is too much of a leap, this hat is still and oldie and a goodie. Still undecided on how to shape but I'll be looking through the pre-40s thread and old fashion plates and advertisements for inspiration.
What a fabulous addition Jonathan. Congratulations
 

AbbaDatDeHat

I'll Lock Up
Messages
8,633
Pretty sure this one has become my oldest felt hat, a non-western Stetson No. 1 Quality:
View attachment 365468

View attachment 365469

View attachment 365470

View attachment 365471

View attachment 365472

View attachment 365473

View attachment 365474

Specs:
5-3/8" Crown
2-3/4" Brim
3/8" Overwelt
2" Ribbon
116g Weight
LOT 2534​

Beautiful light grey heathered felt with a medium to long hair finish. There are several moth nibbles throughout but due to the finish they're indistinguishable unless looking up close. The double frayed bow is what immediately cued me to this likely being an old piece. The flipped orientation of the No. 1 crest also seems to be less common. I know @alanfgag and @jlee562 have hats with a crest oriented this way.

Because of these features I broke one of my rules in regards to buying because no size was shown. The only dimension listed by the seller was the inner circumference, measuring "about 23 inches." I personally don't trust this dimension but I went ahead and BIN'd anyway. Very relieved when I took it out of the box and it fit my head, later finding the 7-3/8 tag behind the sweat.

The sweat is still quite supple, though obviously some stitches are missing. I was quite careful locating the LOT number in front, first utilizing a mirror to verify it was there and legible. At 2534 it's one of the relatively lower numbers, and lower than my Stetson derby (6614).

As an added bonus I've tried doing some research on the perforated name CJ Byrns, and the most common hits tie to a lumber baron from Michigan's Upper Peninsula. Amongst other things he served as the General Manager at Birds Eye Veneer in Escanaba in the 1920s, which is the city where I grew up. I realize this is a bit speculative on my part but it would just about be the proverbial feather in the cap if this hat truly did once belong to him. I've contacted the local historical society for a couple records they have on file associated with Byrns. I'd also like to check census records to see if any others with the same name are documented. The pieces so far, though, seem to fit. His position warranted him spending time in Chicago for business, and a description of his preserved home mentions the bathroom being remodeled after a recent stay at a hotel in Chicago. So buying a hat at Marshall Field & Co of Chicago seems plausible.

Even if the Byrns connection is too much of a leap, this hat is still and oldie and a goodie. Still undecided on how to shape but I'll be looking through the pre-40s thread and old fashion plates and advertisements for inspiration.
Love this!!
I vote center crease, subtle front dents....elegant.
Quite the look.
B
 
Messages
18,886
Location
Central California
Pretty sure this one has become my oldest felt hat, a non-western Stetson No. 1 Quality:
View attachment 365468

View attachment 365469

View attachment 365470

View attachment 365471

View attachment 365472

View attachment 365473

View attachment 365474

Specs:
5-3/8" Crown
2-3/4" Brim
3/8" Overwelt
2" Ribbon
116g Weight
LOT 2534​

Beautiful light grey heathered felt with a medium to long hair finish. There are several moth nibbles throughout but due to the finish they're indistinguishable unless looking up close. The double frayed bow is what immediately cued me to this likely being an old piece. The flipped orientation of the No. 1 crest also seems to be less common. I know @alanfgag and @jlee562 have hats with a crest oriented this way.

Because of these features I broke one of my rules in regards to buying because no size was shown. The only dimension listed by the seller was the inner circumference, measuring "about 23 inches." I personally don't trust this dimension but I went ahead and BIN'd anyway. Very relieved when I took it out of the box and it fit my head, later finding the 7-3/8 tag behind the sweat.

The sweat is still quite supple, though obviously some stitches are missing. I was quite careful locating the LOT number in front, first utilizing a mirror to verify it was there and legible. At 2534 it's one of the relatively lower numbers, and lower than my Stetson derby (6614).

As an added bonus I've tried doing some research on the perforated name CJ Byrns, and the most common hits tie to a lumber baron from Michigan's Upper Peninsula. Amongst other things he served as the General Manager at Birds Eye Veneer in Escanaba in the 1920s, which is the city where I grew up. I realize this is a bit speculative on my part but it would just about be the proverbial feather in the cap if this hat truly did once belong to him. I've contacted the local historical society for a couple records they have on file associated with Byrns. I'd also like to check census records to see if any others with the same name are documented. The pieces so far, though, seem to fit. His position warranted him spending time in Chicago for business, and a description of his preserved home mentions the bathroom being remodeled after a recent stay at a hotel in Chicago. So buying a hat at Marshall Field & Co of Chicago seems plausible.

Even if the Byrns connection is too much of a leap, this hat is still and oldie and a goodie. Still undecided on how to shape but I'll be looking through the pre-40s thread and old fashion plates and advertisements for inspiration.


Way to go! That’s a real dream hat.
 

Mr Oldschool

One of the Regulars
Messages
108
Location
Southern Oregon
Pretty sure this one has become my oldest felt hat, a non-western Stetson No. 1 Quality:
View attachment 365468

View attachment 365469

View attachment 365470

View attachment 365471

View attachment 365472

View attachment 365473

View attachment 365474

Specs:
5-3/8" Crown
2-3/4" Brim
3/8" Overwelt
2" Ribbon
116g Weight
LOT 2534​

Beautiful light grey heathered felt with a medium to long hair finish. There are several moth nibbles throughout but due to the finish they're indistinguishable unless looking up close. The double frayed bow is what immediately cued me to this likely being an old piece. The flipped orientation of the No. 1 crest also seems to be less common. I know @alanfgag and @jlee562 have hats with a crest oriented this way.

Because of these features I broke one of my rules in regards to buying because no size was shown. The only dimension listed by the seller was the inner circumference, measuring "about 23 inches." I personally don't trust this dimension but I went ahead and BIN'd anyway. Very relieved when I took it out of the box and it fit my head, later finding the 7-3/8 tag behind the sweat.

The sweat is still quite supple, though obviously some stitches are missing. I was quite careful locating the LOT number in front, first utilizing a mirror to verify it was there and legible. At 2534 it's one of the relatively lower numbers, and lower than my Stetson derby (6614).

As an added bonus I've tried doing some research on the perforated name CJ Byrns, and the most common hits tie to a lumber baron from Michigan's Upper Peninsula. Amongst other things he served as the General Manager at Birds Eye Veneer in Escanaba in the 1920s, which is the city where I grew up. I realize this is a bit speculative on my part but it would just about be the proverbial feather in the cap if this hat truly did once belong to him. I've contacted the local historical society for a couple records they have on file associated with Byrns. I'd also like to check census records to see if any others with the same name are documented. The pieces so far, though, seem to fit. His position warranted him spending time in Chicago for business, and a description of his preserved home mentions the bathroom being remodeled after a recent stay at a hotel in Chicago. So buying a hat at Marshall Field & Co of Chicago seems plausible.

Even if the Byrns connection is too much of a leap, this hat is still and oldie and a goodie. Still undecided on how to shape but I'll be looking through the pre-40s thread and old fashion plates and advertisements for inspiration.
Super cool! Start looking through hat photos from the teens! You're one step closer to being able to time travel!
 

Daniele Tanto

I'll Lock Up
Messages
4,090
Location
Verona - Italia
A few years ago I bought two batches of shortly finished Italian felts, almost formed and a couple ready for use. One was made up of Borsalino "experiments" and another seems to be of Barbisio manufacture. The latter were all formed, but without finishes or, if any, had been removed.
So I started my plan to get new hats from old felts. This is the first of the series.
Panna Borsa PEN 2.JPG
The Borsalino experimental felt was very thin and with some imperfections in its weight, some points were thicker others less. It has been balanced and "clipped" in order to give a uniform result
Panna Borsa PEN 4.JPG

All this was possible with the fundamental help and patience of Fleur, Dutch hatter, titular of Penumbra Hat.
Panna Borsa Pen Penumbra.JPG
She has a very good knowledge of felts, their strengths and weaknesses and here she has obtained a very light, extremely malleable hat from a felt that had some problems
Panna Borsa PEN 6.JPG
As you can see it has become an excellent hat, light weight: 98 grams!
Panna Borsa PEN 5.JPG
The measurements are: raw brim 6 cm., 3.8 cm high ribbon and minimum height of the crown is 10 cm.
Panna Borsa PEN 8.JPG

Together we chose the color of the ribbon and its shape to match the cream color of the felt, finished with a short hair

Panna Borsa PEN 9 a.JPG

I chose this felt for its color and its surface which lent itself to being finished in the way you see.
Panna Borsa PEN interno totale.JPG
It has now become a Borsalino - Penumbra Hats creation to my delight
 

Pellie

One Too Many
Messages
1,400
Location
Enschede, Netherlands
A few years ago I bought two batches of shortly finished Italian felts, almost formed and a couple ready for use. One was made up of Borsalino "experiments" and another seems to be of Barbisio manufacture. The latter were all formed, but without finishes or, if any, had been removed.
So I started my plan to get new hats from old felts. This is the first of the series.
View attachment 365523 The Borsalino experimental felt was very thin and with some imperfections in its weight, some points were thicker others less. It has been balanced and "clipped" in order to give a uniform result
View attachment 365524
All this was possible with the fundamental help and patience of Fleur, Dutch hatter, titular of Penumbra Hat.
View attachment 365525
She has a very good knowledge of felts, their strengths and weaknesses and here she has obtained a very light, extremely malleable hat from a felt that had some problems
View attachment 365526 As you can see it has become an excellent hat, light weight: 98 grams!
View attachment 365527 The measurements are: raw brim 6 cm., 3.8 cm high ribbon and minimum height of the crown is 10 cm.
View attachment 365528
Together we chose the color of the ribbon and its shape to match the cream color of the felt, finished with a short hair

View attachment 365529
I chose this felt for its color and its surface which lent itself to being finished in the way you see.
View attachment 365530
It has now become a Borsalino - Penumbra Hats creation to my delight
Beautiful hat!
 
Messages
10,774
A few years ago I bought two batches of shortly finished Italian felts, almost formed and a couple ready for use. One was made up of Borsalino "experiments" and another seems to be of Barbisio manufacture. The latter were all formed, but without finishes or, if any, had been removed.
So I started my plan to get new hats from old felts. This is the first of the series.
View attachment 365523 The Borsalino experimental felt was very thin and with some imperfections in its weight, some points were thicker others less. It has been balanced and "clipped" in order to give a uniform result
View attachment 365524
All this was possible with the fundamental help and patience of Fleur, Dutch hatter, titular of Penumbra Hat.
View attachment 365525
She has a very good knowledge of felts, their strengths and weaknesses and here she has obtained a very light, extremely malleable hat from a felt that had some problems
View attachment 365526 As you can see it has become an excellent hat, light weight: 98 grams!
View attachment 365527 The measurements are: raw brim 6 cm., 3.8 cm high ribbon and minimum height of the crown is 10 cm.
View attachment 365528
Together we chose the color of the ribbon and its shape to match the cream color of the felt, finished with a short hair

View attachment 365529
I chose this felt for its color and its surface which lent itself to being finished in the way you see.
View attachment 365530
It has now become a Borsalino - Penumbra Hats creation to my delight
What a great collaboration Daniele. She did a wonderful job.
 

Forum statistics

Threads
106,930
Messages
3,024,648
Members
52,470
Latest member
GokhanB
Top